The outside diameter of piping in high-temperature service, about 800°F, should be measured to check for
The base metal is P.No.8, the weld metal is A . No.8-9, and the wall thickness is 1", what is the hold time for heat treatment
A piping system has a corrosion rate of 0.074 inches per year, the actual wall thickness is 0.370 inches and the minimum required thickness is 0.1 inch.
What is the remaining life?
A leak test was performed on a buried piping system. The system was re pressured to 125 psi four hours into the test. Sometime during the final four hours, the gauge fell 5
The three well-known methods of determining soil resistivity are, soil bar, soil box and______.
