Free Avaya 132-S-911-3 Exam Dumps Questions & Answers

Two voice endpoints in an IP network have different CODECs. How are calls between the endpoints affected?

• A.  both parties hear ringing and the call can be answered but the voice quality is garbled
• B.  the call completes,unshuffled
• C.  both the calling and called parties hear fast-busy
• D.  the calling party hears ringing while the called party hears fast-busy

You have a Communication Manager R3 1 phone system with all IP phones and there is no dial tone. You verify that all of the hardware is working properly. Which two steps can you take to identify the cause of the problem? (Choose two.)

• A.  set a static IP address on your laptop and see if you can ping the TN2302 or TN2602
• B.  set a static IP address on your laptop and see if you can ping the TN2312
• C.  verify that theMedPro board has the correct IP settings
• D.  set a static IP address on you laptop and see if you can ping the TN799

You are migrating from a Definity server to an S8500/S87XX server. Where is the IPSI board located?

• A.  It can be slotted into any available media gateway slot.
• B.  The location depends on which media server is used.
• C.  The location depends on which media gateway is used.
• D.  It is always placed into slot number 1.

How many G.711 calls (20 ms sampling) can traverse an IP/PPP T1 link without packet loss?

• A.  12
• B.  23
• C.  24
• D.  18

In an Avaya SIP Enabled Services (SES) solution built with an Avaya IP Telephony system, which Communication Manager command should be setup to ensure that a call to a 46xx SIP phone will route to the corresponding SES server user?

• A.  Add trunk group
• B.  Add signaling group
• C.  Add station
• D.  Change off-pbx telephone station-mapping