Free Avaya 6101-1 Exam Dumps Questions & Answers

Click on the exhibit button After checking the VLAN configuration using the show vlan info basic and the show vlan info port commands, there are no ACTIVE MEMBER ports for VLM4-50.

What is causing this problem?

• A.  The ports have not been configured as active for this VLAN
• B.  The default setting for this type of VLAN is potential and no AppleTalk traffic has entered any of these ports
• C.  AppleTalk Protocol VLANs do not have ACTIVE MEMBERS
• D.  There are no devices connected to these ports.

A technician is configuring Multi Link trunking (SMLT) for an Ethernet routing switch (ERS) 8600 switch cluster.
To ensure the fastest possible recovery time, which feature should be avoided?

• A.  SLPP
• B.  MLT
• C.  802.3 ad
• D.  VLACP

In a newly installed network the port LED on an Ethernet Routing Switch (ERS) 5500 is amber, not green. What does this mean?

• A.  It indicates that there is a transmit fault.
• B.  It indicates that the port is administratively disabled.
• C.  The port is set to operate at 10 Mbps.
• D.  The port is set to operate at 100 Mbps.

When multiple VLANs are used, DHCP relay is required to get the DHCP information from the end user VLAN to the DHCP server (which would normally sit on core server VLAN)
Which statement about how to enable DHCP relay for a VLAN Is true?

• A.  The physical VLAN IP address is used as the DHCP relay agent
• B.  the IP address of the core server VLAN is used.
• C.  the IP address of the DHCP relay agent is used
• D.  The virtual VLAN IP address is used as the DHCP relay agent

Set of procedures will upgrade the boot monitor on an Ethernet Routing switch (ERS) 8600 with a single 8692SF module?

• A.  Modify the boot choice for run-time image
• B.  Boot the new image
• C.  Copy the new Image to flash Boot the new image
• D.  Copy the new image to flash Activate new image with SF module in service
• E.  Copy the new image to flash Modify the boot choice for rim-time image Boot the new image