Free Avaya 7004-1 Exam Dumps Questions & Answers

In order to set up the Customer Data Block within Element Manager to support Zone Based Dialing, and assuming Package 420 ZBD Package is installed and active, what needs to be done first?

• A.  Select the Public Dial Plan from the customer's Features page.
• B.  Configure Numbering Zones.
• C.  Select the Private Dial Plan from the customer's Features page.
• D.  Select the "Enable Numbering Zones" option from the customer's Feature page.

A customer has just deployed a new Communication Server 1000 RIs. 7 x High Availability system. You have been instructed to configure the required virtual routes to comply with the company's dialing plan strategy.
Which Feature Package must be enabled to allow virtual routes on the system?

• A.  Package 148 Advanced ISDN Network Services
• B.  Package 145 integrated Services Digital Network
• C.  Package 161 ISDN Supplementary Features
• D.  Package 147 ISDN Signaling Link

Click the Exhibit button.

Consider a company's dialing plan shown in the exhibit and an example for its requirements:
A station user at the company, with Location Code 221, placed an ESN call, dialing 7-2212581. This would be an On-Net call and the NARS programming must remove the LOC code and dial the DN internally.
What programming would remove the location code for a call dialed within the originating Communication Server 1000 to a DN on that same Communication Server 1000?

• A.  The location codes for each site would be programmed under the LOC programming in Translation Table #2 at all locations.
• B.  Each site would have the Location Codes for all sites programmed as Home Location Codes (HLOC) in Translation Table #1 of their CS 1000.
• C.  Home NPA Codes (HNPA) for each site would be programmed under Translation Table #1 at each location in their CS 1000.
• D.  Each site would have its own Location Code programmed as a Home Location Code (HLOC) under Translation Table #1 in their CS 1000.

Click the Exhibit button.

A customer has a Communication Server 1000 RIs. 7 x system with System Manger / Unified Management (UCM) enabled. They have requested the addition of two new UCM Administrator User with the limited ability to provision telephones at each site. Refer to the exhibit for the roles current existing in the system.
Which action can the Network Administrator take to add these new accounts per the customer's requirements?

• A.  Add a new TelephonyAdmin role with the specific permissions required to allow telephone configuration.
• B.  Change the built-in role Patcher role to remove all permissions except those that allow telephone configuration.
• C.  Assign the new users to the built-in NetworkAdministrator role because it has the permissions that allow telephone configuration.
• D.  Change the built-in MemberRegister role to add the permissions required to allow telephone configuration.

Which functionality do TIE trunks provide?

• A.  provide incoming or outgoing service only, and not a combination of incoming/outgoing connections
• B.  connects a telephone companies' central office and the PBX of a customer
• C.  connects two different PBXs, whether In the same budding or farther away
• D.  allows an outside caller to dial a station on a PBX directory