Free Avaya 76940X Exam Dumps Questions & Answers

A customer reports that several VMs have become Unreachable or Invalid in vCenter.
What would you check or try first to solve this problem?

• A.  On the Host, from vCenter, try to re-scan the Datastores.
• B.  From the Host, stop and start the monitoring agent.
• C.  Place the host in maintenance mode.
• D.  Shut the host down and restart it.

A support engineer is upgrading a PodFX 3.1 system to ACP 4200 4.0. The system has two pairs of ServerTech PDUs.
Which statement about the PDU firmware file describes the upgrade process that the engineer needs to follow?

• A.  It will need to be uploaded to each PDU Management Web Interface.
• B.  It will need to be uploaded to all 4 PDUs.
• C.  It will need to be uploaded to Orchestrator. Orchestrator will then distribute the file to the 4 PDUs.
• D.  It will need to be uploaded to one PDU. This PDU will then distribute the file to the remaining 3 PDUs.

Refer to the exhibit.

When a support engineer navigates to Orchestrator's Rack View of an ACP 4200 system, the engineer notices that the V1-V6 slots on the right of the diagram are not populated.
What could be causing this problem?

• A.  V1-V6 are used to represent Vertical PDUs which are not present in this particular system.
• B.  V1-V6 are used to represent Virtual Machines which are not present in this particular system.
• C.  V1-V6 are used to represent G450 Media Modules which are not present in this particular system.
• D.  V1-V6 are only used for ACP 100 systems.

A support engineer is tasked with upgrading a CPOD 2.1 system to ACP 4200 4.0.
Which statement about the upgrade process is true?

• A.  Upgrading a CPOD 2.1 system to ACP 4200 4.0 is supported, and a direct upgrade path is supported.
• B.  Upgrading a CPOD 2.1 system to ACP 4200 4.0 is supported, but a direct upgrade path is only partially supported.
• C.  Upgrading a CPOD 2.1 system to ACP 4200 4.0 is supported only if the Rack enclosure is replaced with a new 48 Inch Deep Model.
• D.  Upgrading a CPOD 2.1 system to ACP 4200 4.0 is not supported.

A support engineer is tasked to power down a VSP switch using the management tools available for the ACP 4200.
Which statement is true about how the engineer would accomplish this task?

• A.  This can only be done if the engineer is on-site to remove the VSP's power cable.
• B.  Login to Servertech PDU Web Interface and use the outlet control option.
• C.  Login to Enterprise Device Manager and use the chassis power down option.
• D.  This can only be done if the engineer is on-site to switch off the VSP's power switch.