Free CWNP CWDP-304 Exam Dumps Questions & Answers

You are working on a VoWLAN design with your customer's wired networking team. How many distinct priority levels do you expect for the voice applications?

• A.  1 priority level for voice RTP, 1 priority level for voice control and RTCP
• B.  1 priority level for VoWLAN client traffic, 1 priority level for wired VoIP client traffic
• C.  1 priority level per client and AP pair, so the total number depends on the expected number of clients
• D.  1 priority level, but 2 queues (one for uplink traffic, one for downlink traffic)

You have initiated a site survey to be performed and the team has been onsite and is halfway through gathering the necessary data.
The project sponsor just asked you to make sure the WLAN supports radio frequency identification (RFID) location tracking. How would you possibly characterize this situation?
Response:

• A.  Any WLAN will support location tracking.
• B.  The 802.3af RTLS standard should be incorporated into the AP configuration.
• C.  The power requirements on the UPS need to be evaluated.
• D.  The 802.11g standard incorporates location tracking.
• E.  Scope creep has occurred.

What is an advantage of centralized data forwarding?

• A.  It increases the signal strength for wireless client devices
• B.  It increases the encryption strength for user traffic
• C.  It reduces delay for user traffic
• D.  It allows for centralized filtering of wireless traffic

Prior to meeting with the customer for the first time, you should do which of the following?
Response:

• A.  Research the customer as much as possible. Try to understand what their business is, who their customers are, and any other information you can find regarding product lines and recent press announcements.
• B.  Decide which vendor they will benefit most from.
• C.  Plan an initial design to present to them.
• D.  Find out what vendor their competitors use.

While configuring your site survey software for an upcoming manual survey project, you notice the configuration option for "Network Card Simulation". What is the purpose of such a feature and when would you use it?

• A.  This setting allows the site survey software to convert the APs measured downlink RF data into a simulated data set as if the same data were transmitted by a specific client station. It is useful for determining uplink client performance when clients are located far from APs as well as projecting cell size for ad hoc networks.
• B.  This is the configuration area in which you specify the adapter type that will be used for the site survey so that the survey software can interpret that adapters reported metrics (based on proprietary formulas) into an RF measurement that is standardized by the survey software and known to its users. This is done
• C.  Since WLAN adapters are not typically calibrated by manufacturers, this setting is a form of software calibration in which you can calibrate an (uncalibrated) adapter to match one of the calibrated adapters shown in the list. This process improves the reliability of RF data collection and reporting when uncalibrated adapters are used.