You are running R80.XX on an open server and you see a high CPU utilization on your 12 CPU cores You now want to enable Hyperthreading to get more cores to gain some performance. What is the correct way to achieve this?

• A.just turn on HAT in the bios of the server and after it has booted enable it in cpconfig
• B.in dish run set HAT on
• C.Hyperthreading is not supported on open servers, on on Check Point Appliances
• D.just turn on HAT in the bios of the server and boot it

Comment: *

Name: *

Email: *

Verification: *

If you run the command "fw monitor -e accept src=10.1.1.201 or src=172.21.101.10 or src=192.0.2.10;" from the cli sh What will be captured?

• A.Only packet going to 192.0.2.10
• B.fw monitor only works in expert mode so no packets will be captured
• C.Packets from 10 1 1 201 going to 192.0 2.10
• D.Packets destined to 172 21 101 10 from 10.1.1.101

Comment: *

Name: *

Email: *

Verification: *

Which of the following is contained in the System Domain of the Postgres database?

• A.User modified configurations such as network objects
• B.Saved queries for applications
• C.Configuration data of log servers
• D.Trusted GUI clients

Comment: *

Name: *

Email: *

Verification: *

How can you increase the ring buffer size to 1024 descriptors?

• A.dbedit>modify properties firewall_properties rx_ringsize 1024
• B.fw ctl int rx_ringsize 1024
• C.echo rx_ringsize=1024>>/etc/sysconfig/sysctl.conf
• D.set interface eth0 rx-ringsize 1024

Comment: *

Name: *

Email: *

Verification: *

What is the benefit of running "vpn debug trunc over "vpn debug on"?

• A."vpn debug trunc*truncates the capture hence the output contains minimal capture
• B.No advantage one over the other
• C."vpn debug trunc" purges ike.elg and vpnd elg and creates limestarnp while starting ike debug and vpn debug
• D."vpn debug trunc* provides verbose capture

Comment: *

Name: *

Email: *

Verification: *