Free Cisco 200-301 Exam Dumps Questions & Answers

Refer to the exhibit. Users at a branch office are experiencing application performance issues, poor VoIP audio quality, and slow downloads. What is the cause of the issues?

• A.  QoS queuing
• B.  overutilization
• C.  broadcast storm
• D.  interface configuration

Where does the configuration reside when a helper address is configured to support DHCP?

• A.  on the router closest to the server
• B.  on every router along the path
• C.  on the switch trunk interface
• D.  on the router closest to the client

You have two paths for the 10.10.10.0 network - one that has a feasible distance of 3072 and the other of 6144.
What do you need to do to load balance your EIGRP routes?

• A.  Change the maximum paths to 2
• B.  Change the IP addresses so both paths have the same source IP address
• C.  Change the configuration so they both have the same feasible distance
• D.  Change the variance for the path that has a feasible distance of 3072 to 2

What is recommended for the wireless infrastructure design of an organization?

• A.  configure the first three access points are configured to use Channels 1, 6, and 11
• B.  group access points together to increase throughput on a given channel
• C.  assign physically adjacent access points to the same Wi-Fi channel
• D.  include a least two access points on nonoverlapping channels to support load balancing

What is the difference between SNMP traps and SNMP polling?

• A.  SNMP traps are initiated by the network management system, and network devices initiate SNMP polling.
• B.  SNMP traps are used for proactive monitoring, and SNMP polling is used for reactive monitoring.
• C.  SNMP traps send periodic updates via the MIB, and SNMP polling sends data on demand.
• D.  SNMP traps are initiated using a push model at the network device, and SNMP polling is initiated at the server.