Refer to the exhibit.

An engineer configures the router 10.1.100.10 for EIGRP autosummarization so that R1 should receive the summary route of 10.0.0.0/8. However, R1 receives more specific /24 routes.
Which action resolves this issue?

• A.Router R1 should configure ip summary address eigrp (AS number) 10.0.0.0 255.0.0.0 for the R1 Fast Ethernet 0/0 connected interface.
• B.Router 10.1.100.10 should configure ip summary address eigrp (AS number) 10.0.0.0 255.0.0.0 for the R1 Fast Ethernet 0/0 connected interface.
• C.Router R1 should configure ip route 10.0.0.0 255.0.0.0 null 0 for the routes that are received on R1.
• D.Router 10.1.100.10 should configure ip route 10.0.0.0 255.0.0.0 null 0 for the routes that are summarized toward R1.

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit. an engineer is trying to get 192.168.32.100 forwarded through 10.1.1.1, but it was forwarded through 10.1.1.2. What action forwards the packets through 10.1.1.1?

• A.Configure EIGRP to receive 192.168.32.0 route with lower metric.
• B.Configure EIGRP to receive 192.168.32.0 route with equal or longer prefix than /24.
• C.Configure EIGRP to receive 192.168.32.0 route with longer prefix than /19.
• D.Configure EIGRP to receive 192.168.32.0 route with lower admin distance.

Comment: *

Name: *

Email: *

Verification: *

Drag and drop the MPLS concepts from the left onto the descriptions on the right.

Correct Answer:

Explanation
+ allows an LSR to remove the label before forwarding the packet: penultimate hop popping
+ accepts unlabeled packets and imposes labels: label edge router
+ group of packets that are forwarded in the same manner: forwarding equivalence class
+ receives labeled packets and swaps labels: label switch router
Explanation
A label edge router (LER, also known as edge LSR) is a router that operates at the edge of an MPLS network and acts as the entry and exit points for the network. LERspush an MPLS label onto an incoming packet and pop it off an outgoing packet.
A forwarding equivalence class (FEC) is a term

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.

SanFrancisco and Boston routers are choosing slower links to reach each other despite the direct links being up Which configuration fixes the issue?

• A.Option D
• B.Option A
• C.Option B
• D.Option C

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.

An engineer configures DMVPN and receives the hub location prefix of 10.1.1.0724 on R2 and R3 The R3 prefix of 10 1.3.0/24 is not received on R2. and the R2 prefix 10.1,2.0/24 is not received on R3. Which action reserves the issue?

• A.Split horizon prevents the routes from being advertised between spoke routers it should be disabled with the command no ip split-horizon eigrp 10 on the tunnel interface of R1
• B.Split horizon prevents the routes from being advertised between spoke routers it should be disabled with the no ip split-horizon eigrp 10 command on the Gi0/0 interface of R1.
• C.There is no spoke-to-spoke connection DMVPN configuration should be modified with a manual neighbor relationship configured between R2 and R3 and confirmed bb use of the show ip eigrp neighbor command.
• D.There is no spoke-to-spoke connection DMVPN configuration should be modified to enable a tunnel connection between R2 and R3 and neighbor relationship confirmed by use of the show ip eigrp neighbor command

Comment: *

Name: *

Email: *

Verification: *