Why is 802.11a connectivity reduced in an X-ray room?

• A.X-rays create significant non-Wi-Fi interference on the 802.11a band
• B.X-rays within these rooms cause multipath issues.
• C.X-ray rooms exhibit increased signal attenuation
• D.X-rays impact the 802.11a UNll-2 channels Vial cause access points to dynamically change channels.

Comment: *

Name: *

Email: *

Verification: *

An engineer is designing a new wireless network. Based on the design, OceExtend AP functionality must be used. Which type of license must the Cisco 5520 WLC v8.3 have?

• A.WPlus license
• B.Plus license
• C.Base license
• D.OceExtend AP license

Comment: *

Name: *

Email: *

Verification: *

Guest anchoring is configured for a newly created SSID for your company. It has been noticed that the mobility tunnels are not up, and that MPING fails from your foreign WLC to the anchor WLC. What is the reason that it is failing?

• A.A rule is needed at the firewall to allow UDP port 16666 for communication to work.
• B.A rule is needed at the firewall to allow UDP port 97 for communication to work.
• C.A rule is needed at the firewall to allow TCP port 97 for communication to work.
• D.A rule is needed at the firewall to allow TCP port 16666 for communication to work.

Correct Answer: A

Comment: *

Name: *

Email: *

Verification: *

Where must the APs be mounted when used in a high-density wireless network to provide 6 dB to 20 dB of attenuation to a cell?

• A.in the aisle
• B.under the seat
• C.above the stage
• D.under the stage

Comment: *

Name: *

Email: *

Verification: *

A customer deploys a new Cisco high-density wireless network within the open areas of a mall to provide free public wireless on 5 GHz. The existing mall tenants have their own wireless networks that are independently managed. Which design approach minimizes channel utilization for the public network?

• A.Enable all 5-GHz channels that are supported by the region and use 40-MHz channels.
• B.Enable UNII-1 channels only and use 80-MHz channels.
• C.Enable all 5-GHz channels that are supported by the region and use 20-MHz channels.
• D.Enable UNII-1 channels only and use 20-MHz channels.

Comment: *

Name: *

Email: *

Verification: *