Free Access to Cisco.300-430.v2023-09-21.q229 with Valid Practice Test (Page 42)

Question 201

What is the default NMSP echo interval between Cisco MSE and a Wireless LAN Controller?

A.15 seconds
B.60 seconds
C.10 seconds
D.30 seconds

Question 202

What is the default IEEE 802.1x AP authentication configuration on a Cisco Catalyst 9800 Series Wireless Controller?

A.EAP-PEAP with 802.1x port authentication
B.EAP-TLS with 802.1x port authentication
C.EAP-FAST with CAPWAP DTLS + port authentication
D.EAP-FAST with CAPWAP DTLS

Question 203

What is an important consideration when implementing a dual SSID design for BYOD?

A.If multiple WLCs are used, the WLAN IDs must be exact for the clients to be provisioned and traverse the network correctly.
B.One SSID is for provisioning and the other SSID is for gaining access to the network. The use of an ACL should not be enforced to make the client connect to the REAL SSID after provisioning.
C.After using the provisioning SSID, an ACL that used to make the client switch SSIDs forces the user to associate and traverse the network by MAC filtering.
D.SSIDs for this setup must be configured with NAC State-RADIUS NAC for the clients to authenticate with Cisco ISE, or with NAC State-ISE NAC for Cisco ISE to associate the client.

Question 204

An engineer is implementing a FlexConnect group for access points at a remote location using local switching but central DHCP. Which client feature becomes available only if this configuration is changed?

A.multicast
B.static IP
C.fast roaming
D.mDNS

Question 205

An engineer wants to configure WebEx to adjust the precedence and override the QoS profile on the WLAN.
Which configuration is needed to complete this task?

A.Change the WLAN reserved bandwidth for WebEx
B.Create an AVC profile for WebEx
C.Create an ACL for WebEx
D.Change the AVC application WebEx-app-sharing to mark

Question 201

Question 202

Question 203

Question 204

Question 205

Download PDF File