A corporation has recently implemented a BYOD policy at their HQ. Which two risks should the security director be concerned about? (Choose two.)

• A.malware
• B.unauthorized users
• C.lost and stolen devices
• D.network analyzers
• E.keyloggers

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.

An engineer must connect a fork lift via a WGB to a wireless network and must authenticate the WGB certificate against the RADIUS server. Which three steps are required for this configuration? (Choose three.)

• A.Configure the certificate, WLAN, and radio interface on WGB.
• B.Configure the access point with the root certificate from ISE.
• C.Configure WGB as a network device in ISE.
• D.Configure a policy on ISE to allow devices to connect that validate the certificate.
  https://mrncciew.com/2018/05/25/wgb-with-peap/
• E.Configure WLAN to authenticate using ISE.
• F.Configure the certificate on the WLC.

Comment: *

Name: *

Email: *

Verification: *

What is the difference between PIM sparse mode and PIM dense mode?

• A.Sparse mode uses distribution trees. Dense mode floods.
• B.Sparse mode supports multiswitch networks. Dense mode supports only one switch.
• C.Sparse mode supports only one switch. Dense mode supports multiswitch networks.
• D.Sparse mode floods. Dense mode uses distribution trees.

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.

An engineer is creating an ACL to restrict some traffic to the WLC CPU. Which selection must be made from the direction drop-down list?

• A.It must be Outbound because it is traffic that is generated from the WLC.
• B.To have the complete list of options, the CPU ACL must be created only by the CLI.
• C.Packet direction has no significance; it is always Any.
• D.It must be Inbound because traffic goes to the WLC.

Comment: *

Name: *

Email: *

Verification: *

What is an important consideration when implementing a dual SSID design for BYOD?

• A.After using the provisioning SSID, an ACL that used to make the client switch SSIDs forces the user to associate and traverse the network by MAC filtering.
• B.If multiple WLCs are used, the WLAN IDs must be exact for the clients to be provisioned and traverse the network correctly.
• C.SSIDs for this setup must be configured with NAC State-RADIUS NAC for the clients to authenticate with Cisco ISE, or with NAC State-ISE NAC for Cisco ISE to associate the client.
• D.One SSID is for provisioning and the other SSID is for gaining access to the network. The use of an ACL should not be enforced to make the client connect to the REAL SSID after provisioning.

Correct Answer: D

Comment: *

Name: *

Email: *

Verification: *