Refer to the exhibit.

An engineer has successfully fixed BGP peering issue. R1 has an established eBGP peering with R2 and R3. Which mechanism should the engineer apply in order to steer the traffic correctly?

• A.The local preference attribute can be applied on R3 to influence AS 65513 to use AS 65515 as the secondary path.
• B.The IGP metric can be manipulated on R1 to allow traffic to be load balanced between R2 and R3.
• C.The MED attribute can be applied on R2 to influence R1 to use it as the primary path.
• D.The weight attribute can be applied on R2 to influence AS 65513 to use AS 65515 as the primary path.

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.

Refer to the exhibit A network engineer installed a new router (router 3) at the regional hub running MPLS services for scalability Router 3 is connected to the 10.44 4.0,'24. 10.44 5.024. 10 44.6.0/24. and 10 44 7 0/24 subnets The new router has been configured for OSPF area 2. and it is advertising the four connected networks. The engineer noticed that the same networks are listed as interarea summary routes, and they are being flooded into each area on the area borders Which action resolves the issue?

• A.Under the OSPF configuration on router 3. add area 2 range 10.44.4.0 255.255.252.0.
• B.On router 2, configure a route map to filter the networks.
• C.On router 3, configure an access list to filter the networks.
• D.Under the OSPF configuration on router 2, add area 2 range 10.44.4.0 255.255.252.0.

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.

Refer to the exhibit. An engineer is troubleshooting an issue with traffic steering using the color-only automated steering mechanism. BGP is failing to automatically steer traffic into an SR policy with the given color of a route, regardless of the next hop. The layer 2 configuration is correct, and the physical connection between the devices is working normally. Whch additional command sequence must the engineer add to correct the issue?

• A.Option A
• B.Option D
• C.Option C
• D.Option B

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.

A network operator wants to expand the segment routing global block in upcoming maintenance. The operator must ensure that the changes to the segment routing global block have no adverse impacts on the prefix-sid associated with the loopback0 interface used within the OSPF domain.
Which command can the operator use to enforce R2 to have a strict prefix-sid assignment to loopback0?

• A.Option A
• B.Option D
• C.Option B
• D.Option C

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.

An engineer has successfully fixed BGP peering issue. R1 has an established eBGP peering with R2 and R3. Which mechanism should the engineer apply in order to steer the traffic correctly?

• A.The MED attribute can be applied on R2 to influence R1 to use it as the primary path.
• B.The local preference attribute can be applied on R3 to influence AS 65513 to use AS 65515 as the secondary path.
• C.The weight attribute can be applied on R2 to influence AS 65513 to use AS 65515 as the primary path.
• D.The IGP metric can be manipulated on R1 to allow traffic to be load balanced between R2 and R3.

Comment: *

Name: *

Email: *

Verification: *