Where on Cisco Unified Communications Manager do you configure the standard local route group for a group of devices?

• A.Call Routing > Route/Hunt > Local Route Group Names
• B.System > Location Info
• C.Call Routing > Emergency Location > Emergency Location (ELIN) Groups
• D.System > Device Pool

Comment: *

Name: *

Email: *

Verification: *

A user in location X dials an extension at location
Y. The call travels through a QoS-enabled WAN network, but the user experiences choppy or clipped audio. What is the cause of this issue?

• A.missing Call Admission Control
• B.codec mismatch
• C.ptime mismatch
• D.phone class of service issue

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit. A user reports that when they call a specific phone number, no one answers the call, but when they call from a mobile phone, the call is answered. The engineer troubleshooting the issue is expecting the far-end gateway to cut through audio on the 183 Session Progress SIP message. Which SIP Profile configuration element is necessary for the Cisco Unified Communications Manager to send acknowledgement of provisional responses?

• A.Allow Passthrough of Configured Line Device Caller Information must be enabled.
• B.Accept Audio Codec Preferences in Received Offer must be set to On.
• C.On the SIP Profile, the configuration parameter SIP Rel1XX Options must be set to Send PRACK for all 1xx Messages.
• D.Early Offer for G Clear Calls must be enabled.

Comment: *

Name: *

Email: *

Verification: *

A user reports when they press the services key they do not receive a user ID and password prompt to assign the phone extension. Which action resolves the issue?

• A.Create the default device profiles for all phone models that are used.
• B.Subscribe the phone to the Cisco Extension Mobility service.
• C.Create the end user and associate it to the device profile.
• D.Assign the extension as a mobile extension.

Comment: *

Name: *

Email: *

Verification: *

How does an engineer globalize routing for ingress calls coming from the PSTN to internal DNs?

• A.At Cisco Unified Communications Manager, put the calling number in E.164 format and the called number in E.164 format.
• B.At the PSTN gateway, put the calling number in PSTN format and the called number in DN format.
• C.At Cisco Unified CM, put the calling number in E.164 format and the called number in PSTN format.
• D.At the PSTN gateway, put the calling number in E.164 format and the called number in localized (DN) format.

Comment: *

Name: *

Email: *

Verification: *