Refer to the exhibit.

Which configuration allows Customer2 hosts to access the FTP server of Customer1 that has the IP address of
192.168.1.200?

• A.ip route vrf Customerl 172.16.1.0 255.255.255.0 172.16.1.1 global
  ip route vrf Customer 192.168.1.200 255.255.255.255 192.168.1.1 global
  ip route 192.168.1.0 255.255.255.0 VlanlO
  ip route 172.16.1.0 255.255.255.0 Vlan20
• B.ip route vrf Customerl 172.16.1.0 255.255.255.0 172.16.1.1 Customer2 ip route vrf Customer 192.168.1.200 255.255.255.255 192.168.1.1 Customerl
• C.ip route vrf Customerl 172.16.1.0 255.255.255.0 172.16.1.1 Customerl ip route vrf Customer 192.168.1.200 255.255.255.255 192.168.1.1 Customer2
• D.ip route vrf Customerl 172.16.1.1 255.255.255.255 172.16.1.1 global
  ip route vrf Customer 192.168.1.200 255.255.255.0 192.168.1.1 global
  ip route 192.168.1.0 255.255.255.0 VlanlO
  ip route 172.16.1.0 255.255.255.0 Vlan20

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.

SwitchC connects HR and Sales to the Core switch However, business needs require that no traffic from the Finance VLAN traverse this switch Which command meets this requirement?
A)

B)

C)

D)

• A.Option A
• B.Option B
• C.Option C
• D.Option D

Comment: *

Name: *

Email: *

Verification: *

Drag and drop the LISP components from the left onto the function they perform on the right. Not all options are used.

Correct Answer:

Explanation:
+ accepts LISP encapsulated map requests: LISP map resolver
+ learns of EID prefix mapping entries from an ETR: LISP map server
+ receives traffic from LISP sites and sends it to non-LISP sites: LISP proxy ETR
+ receives packets from site-facing interfaces: LISP ITR
Explanation
ITR is the function that maps the destination EID to a destination RLOC and then encapsulates the original packet with an additional header that has the source IP address of the ITR RLOC and the destination IP address of the RLOC of an Egress Tunnel Router (ETR).
After the encapsulation, the original packet become a LISP packet.
ETR is the function that receives LISP encapsulated packets, decapsulates them and forwards to its local EIDs. This function also requires EID-to-RLOC mappings so we need to point out an "map-server" IP address and the key (password) for authentication.
A LISP proxy ETR (PETR) implements ETR functions on behalf of non-LISP sites. A PETR is typically used when a LISP site needs to send traffic to non-LISP sites but the LISP site is connected through a service provider that does not accept no routable EIDs as packet sources. PETRs act just like ETRs but for EIDs that send traffic to destinations at non-LISP sites.
Map Server (MS) processes the registration of authentication keys and EID-to-RLOC mappings. ETRs sends periodic Map-Register messages to all its configured Map Servers.
Map Resolver (MR): a LISP component which accepts LISP Encapsulated Map Requests, typically from an ITR, quickly determines whether or not the destination IP address is part of the EID namespace

Comment: *

Name: *

Email: *

Verification: *

A customer has 20 stores located throughout a city. Each store has a single Cisco access point managed by a central WLC. The customer wants to gather analysis for users in each store. Which technique supports these requirements?

• A.hyperlocation
• B.trilateration
• C.presence
• D.angle of arrival

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit. PC-1 must access the web server on port 8080. To allow this traffic, which statement must be added to an access control list that is applied on SW2 port G0/0 in the inbound direction?

• A.permit host 192.168.0.5 eq 8080 host 172.16.0.2
• B.permit host 192.168.0.5 it 8080 host 172.16.0.2
• C.permit host 192.168.0.5 host 172.16.0.2 eq 8080
• D.permit host 172.16.0.2 host 192.168.0.5 eq 8080

Comment: *

Name: *

Email: *

Verification: *