Drag and drop the descriptions of the VSS technology from the left to the right. Not all options are used.

Correct Answer:

Comment: *

Name: *

Email: *

Verification: *

A network engineer must configure a router to send logging messages to a syslog server based on these requirements:
* uses syslog IP address: 10.10.10.1
* uses a reliable protocol
* must not use any well-known TCP/UDP ports
Which configuration must be used?

• A.logging host 10.10.10.1 transport udp port 1024
• B.logging host 10.10.10.1 transport tcp port 1024
• C.logging origin-id 10.10.10.1
• D.logging host 10.10.10.1 transport udp port 1023

Comment: *

Name: *

Email: *

Verification: *

A customer requests a network design that supports these requirements:

Which protocol does the design include?

• A.HSRP version 2
• B.GLBP
• C.VRRP version 2
• D.VRRP version 3

Comment: *

Name: *

Email: *

Verification: *

Which deployment option of Cisco NGFW provides scalability?

• A.inline tap
• B.high availability
• C.clustering
• D.tap

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.

A network architect has partially configured static NAT. which commands should be asked to complete the configuration?

• A.R1(config)#interface GigabitEthernet0/0 R1(config)#ip pat outside
  R1(config)#interface GigabitEthernet0/1 R1(config)#ip pat inside
• B.R1(config)#interface GigabitEthernet0/0 R1(config)#ip pat inside
  R1(config)#interface GigabitEthernet0/1 R1(config)#ip pat outside
• C.R1(config)#interface GigabitEthernet0/0 R1(config)#ip nat inside
  R1(config)#interface GigabitEthernet0/1 R1(config)#ip nat outside
• D.R1(config)#interface GigabitEthernet0/0 R1(config)#ip nat outside
  R1(config)#interface GigabitEthernet0/1 R1(config)#ip nat inside

Comment: *

Name: *

Email: *

Verification: *