What is a recommended design choice in a topology for multipathing iSCSI traffic?
A network engineer configures a converged network adapter (CNA) and must associate a virtual fiber Channel 7 interface to VSAN 7. The CAN connected to the interface Eth1/7, and VLAN 700 is mapped to the VSNA.
Which configuration must be applied to create the virtual Fiber Channel interface and associate it with the Ethernet physical interface?
A)
B)
C)
An engineer is configuring a backup operation on the existing Cisco UCS environment using a logical configuration.
Which configuration is expected to be saved by using this backup type?
An engineer must configure the HSRP protocol to implement redundancy using two Cisco Nexus Series Switches In addition, the HSRP must meet these requirements
* Switch1 must retain the primary role if switch2 goes offline
* Switch1 must retain the primary role until normal conditions are restored.
* Switch1 and switch2 must ensure that the routing tables are converged before taking the active role
* switch2 must retain the primary role if the default gateway is not reachable Drag and drop the configuration commands from the right to the left to meet the requirements. The commands are used more than once Not all commands are used
An engineer performs a set of configuration changes for the vPC domain using Session Manager. Which two commands are used to verify the configuration and apply the device changes when no errors are returned?
(Choose two)
