The command show interface veth 705 is telling you that the bound interface is Ethernet 3/1/2 What is the location of the blade that has veth 705 associated to it?

• A.Chassis 3, Slot 1
• B.There is not enough information
• C.Chassis 3. Slot 2
• D.Chassis 1. Slot 2

Comment: *

Name: *

Email: *

Verification: *

When it comes to pinning vNIC traffic from a UCS Server to the Fabric Interconnect uplink what configuration can you perform?

• A.You can configure Static Uplink Pinning. If an uplink interface fails on one Fabric Interconnect the server will fail to the matching uplink on the other Fabric Interconnect
• B.You can configure Automatic Uplink Pinning. If an uplink interface fails on one Fabric Interconnect, the server will fail to the first available uplink on the other Fabric Interconnect
• C.You can configure Static Uplink Pinning. If an uplink interface fails on one Fabric Interconnect, the server will fail to the first available uplink on the same Fabric Interconnect
• D.You can configure Automatic Uplink Pinning. If an uplink interface fails on one Fabric Interconnect the server will fail to the matching uplink on the other Fabric Interconnect
• E.You can configure Static Uplink Pinning. If an uplink interface fails on one Fabric Interconnect, the server will fail to the first available uplink on the other Fabric Interconnect

Comment: *

Name: *

Email: *

Verification: *

An overvoltage condition has occurred on a UCS server However the Cisco IMC System Event Log (SEL) file is full What is the resulting fault logging action?

• A.The oldest entry in the SEL will be overwritten by the overvoltage condition event
• B.The SEL is not used to record server related events, such as overvoltage conditions.
• C.The newest entry in the SEL will be overwritten by the overvoltage condition event.
• D.The overvoltage condition event will not be recorded in the SEL.

Comment: *

Name: *

Email: *

Verification: *