Free EMC D-PCM-DY-23 Exam Dumps Questions & Answers

Which command configures OSPF to advertise the network 10.10.0.0/16 to the Backbone Area?

• A.  network 10.10.0.0 0.0.255.255 area 0
• B.  network 10.10.0.0 0.0.255.255 area 1
• C.  network 10.10.0.0 255.255.0.0 area 1
• D.  network 10.10.0.0 255.255.0.0 area 0

A user's host with an IP address of 172.16.1.22/24 is attempting to FTP a file from the server with IP address 10.1.1.99; however, they are unable to connect.
Which access-list is preventing this traffic?

• A.  # ip access-list ACL2
  # permit ip 172.16.1.0 0.0.0.255 any
• B.  # ip access-list ACL1
  # deny ip any host 10.1.1.99
• C.  # ip access-list ACL3
  # deny ip any 172.16.2.0 0.0.0.255
• D.  # ip access-list ACL4
  # permit ip host 172.16.1.22 host 10.1.1.99

What describes the POE+ capabilities of the Dell EMC N1100P Series?

• A.  Supported on any of the first 12 switch ports or all switch ports, whichever is fewer.May only be enabled on a maximum of half of the supported ports.
• B.  Supported on any of the first half of switch ports or the first 12 switch ports, whichever is fewer.May only be enabled on a maximum of half of the supported ports.
• C.  Supported on all of the first 12 switch ports or all switch ports, whichever is fewer.
• D.  Supported on all of the first half of switch ports or the first 12 switch ports, whichever is fewer.

Which Dell PowerSwitch N-Series model supports the BGP and stack features?

• A.  N3208PX-ON
• B.  N2224PX-ON
• C.  N1124T-ON
• D.  N3224T-ON

Which packet characteristics can policy-based routing be configured to match against?

• A.  TTL, TCP Port, and L3 Packet Length
• B.  TCP Port, TTL, and 802.1p Priority
• C.  TCP Port, L3 Packet Length, and 802.1p Priority
• D.  L3 Packet Length, TTL, and 802.1p Priority