Free EMC DEA-5TT2 Exam Dumps Questions & Answers

You recently joined a company as a junior-level network administrator. You have been tasked with designing the IPv4 scheme for five networks that will be used for training classrooms. These networks need to support no more than 28 devices each. Due to the existing network design, the senior-level network administrator has asked you to work on network 192.168.40.0/24.
If all networks must be made to logically start with the lowest numbered network and end with the largest numbered network, what is the network ID for the third network?

• A.  192.168.40.64/27
• B.  192.168.40.32/27
• C.  192.168.40.96/27
• D.  192.168.40.128/27

Which option is used to configure Network Address Translation (NAT) to provide one-to-one mapping between local and global addresses?

• A.  PAT
• B.  Overload
• C.  Outside source static
• D.  Inside source static

Which route type is added to the routing table by a routing protocol?

• A.  Static
• B.  Dynamic
• C.  Default route
• D.  Directly connected

Which IPv6 scope is used for private addressing on a local network?

• A.  APIPA
• B.  Unique local
• C.  Global
• D.  Area wide

What accurately describes the Simple Network Time Protocol (SNTP)?

• A.  Time synchronization algorithms are more complex and account for clock drift.
• B.  Client synchronizes among a set of distributed time servers.
• C.  Client makes sudden changes in time to keep synchronized.
• D.  Implemented on a Dell EMC Network OS 9 and OS 10.