Free Access to EMC.DES-4122.v2023-11-01.q33 with Valid Practice Test (Page 5)

Question 16

What is the drive characteristic of a BOSS M.2 drive in a Dell EMC PowerEdge server?

A.Write Intensive
B.Quad-level cell
C.Read Intensive
D.Single-level cell

Question 17

A technician working with a Dell EMC PowerEdge 1 take corrective action?

A.Check the LCC Log
Check PSU LED
Reseat the CPU
B.Check the LCC Log
Check PSU LED
Reseat the PSU
C.Check the System Event Log
Check PSU LED
Reseat the PSU
D.Check the System Event Log
Check PSU LED
Do a virtual reseat of the iDRAC

Question 18

A technician needs to update the IDRAC license on a Dell EMC PowerEdge R740 server from Express to Enterprise. The server has the following components:
* 2x CPUs
* 384 GB RAM
* 6x 1 TB drives
* 1x PSU
The server is connected to active AC, but it is powered down, and it needs to stay powered down No errors are presently displayed How can the technician upgrade the license?

A.Power on the server, then connect to the iDRAC and upgrade iDRAC license before powering down the server
B.The license cannot be upgraded on a single PSU system
C.The license cannot be upgraded because the user will not allow the server to be powered on
D.Connect to the iDRAC GUI and upgrade the .DRAC license while the server .s powered down

Question 19

You must configure a BOSS card with 2 x 120GB drives for a Dell EMC PowerEdge server. What is the only supported mode?

A.Non-RAID Mirroring
B.RAID 0
C.RAID 1
D.RAID 5

Question 20

What are the default settings used when applying firmware and a configuration to a replaced part using the Lifecycle Controller?

A.Firmware Allow version upgrade only
Configuration: Disabled
B.Firmware Disabled
Configuration Apply only if firmware match
C.Firmware: Match firmware of replaced part
Configuration Apply always
D.Firmware: Upgrade to latest available version
Configuration Apply always

Question 16

Question 17

Question 18

Question 19

Question 20

Download PDF File