Free EMC DES-4421 Exam Dumps Questions & Answers

When running an Open Networking operating system, which IOM functions are provided through OME-M?

• A.  Hardware health and power control
• B.  Global and privileged configuration modes
• C.  Hardware health and global configuration mode
• D.  Power control and global configuration mode

Where in the OME-M Web interface can the Chassis Deployment Wizard be found?

• A.  Hardware > Initial Configuration
• B.  Home > Configure > Initial Configuration
• C.  Home > Settings > Chassis Deployment Wizard
• D.  Configuration > Deploy > Chassis Deployment Wizard

An administrator is about to perform a firmware update on an MX9116n switch OS 10 from the CLI. The latest OS 10 switch firmware image has been downloaded and their TFTP server is set up.
Upon logged in with administrator credentials on the switch, which command should be used to start the update procedure?

• A.  install tftp://server-ip/imagename
• B.  upgrade tftp://server-ip/imagename
• C.  fwupdate tftp://server-ip/imagename
• D.  firmwaredownload tftp://server-ip/imagename

A server sled has a single mezzanine card installed in the correctly supported slot.
To which IOM fabric(s) does the sled have access?

• A.  Fabric A1 and Fabric B1
• B.  Either Fabric A or Fabric B, depending on the configuration set in OME-M
• C.  Fabric A1 only
• D.  Fabric A1 and Fabric A2

Which MX7000 feature allows an administrator to virtualize network WWN and MAC addresses?

• A.  Virtual Top of Rack
• B.  MX Scalable Architecture
• C.  FlexAddress
• D.  Identity Pool