Free EMC E20-690 Exam Dumps Questions & Answers

On a VNX, SPA is unavailable through Unisphere and does not respond to a ping. The engineer observes an amber light on the front of the SP. What is the possible state of the SP and what corrective action should be taken?

• A.  SP is hung while starting the ESP driver, Re-seat SPE management switch and reboot SP.
• B.  SP has two failed power supplies. Replace the power supplies.
• C.  SP is hung while in degraded mode. Re-image the SP.
• D.  SP has failed DIMMs. Replace DIMMs and/or CPU Module

You are tasked with connecting to a VNX with MCx, but are unsure of the customer's public network IP address for the storage processor.
Which factory-set IP addresses can be used to access Service LAN ports?

• A.  128.221.221.250/128.221.221.251
• B.  128.221.1.250/128.221.1.251
• C.  192.168.1.1/192.168.1.2
• D.  192.168.0.1/192.168.0.2

When installing a VNX for File, which subnet must be used?

• A.  The same subnet as the Data Movers public network
• B.  The same subnet as Domain Server public network interface
• C.  The same subnet as the Control Station private network interface
• D.  The same subnet as the Control Station public network interface

Why would you boot to the utility partition?

• A.  Reimage a corrupted boot image
• B.  Change Fibre Channel port speeds
• C.  Run offline SPCollects
• D.  Restart the management server

What event types can be viewed in Storage System Notifications?

• A.  Hard errors; Fan shutdown
• B.  System startups
• C.  Storage projections; Data Mover load
• D.  Storage usage; Disk shutdown