A VLAN has the following objects configured:
Self-IP 10.10.10.100 with port lockdown set to Allow default
Virtual server 10.10.10.100:443 with UDP profile enabled
Virtual server 10.10.10.0/24 port forwarding virtual server
Global destination NAT forwarding 10.10.10.100 to internal server 172.168.10.100 Which object will process this request when https://10.10.10.100 is entered into a browser?

• A.virtual server 10.10.100/24 port o forwarding virtual server
• B.global destination NAT forwarding 10.10.10.100 to internal server 172.168.10.100
• C.virtual server 10.10.10.100.443 with UDP profile enabled
• D.self-IP 10.10.10.100 with port lockdown set to Allow default

Comment: *

Name: *

Email: *

Verification: *

As a part of the Setup Utility, the administrator sets the host name for the BEl IGP.
What would be the result if the two systems in a redundant pair were set to the
same host name.

• A.In a redundant pair, the two systems will always have the same host name. The parameter is synchronized between the systems.
• B.When the administrator attempts to access the configuration utility using the host name, they will always connect to the active system.
• C.Host names do not matter in redundant pair communication.
• D.The first
  time
  the systems
  are synchronized
  the receiving
  system will be assigned the same selfElIP addresses as the source system.

Comment: *

Name: *

Email: *

Verification: *

A BIG-IP system has the following configuration:
* SNAT is set to Auto Map
* There are two VLANs internal and external
* Default route is pointed to the gateway on external VLAN
* Self P for internal VLAN is 1921.1.2
* Self IP for external VLAN is 192.1.2.2
* Floating IP addresses for internal VLAN is 192.1.1.1
* Floating IP addresses for external VLAN is 192.1.2.1
* The Virtual Server IP address is 192.1.1.100
Which IP address does the BIG-IP system use first when traffic reaches the servers on the internal VLAN?

• A.192.1.1.1
• B.192.1.2.2
• C.192.1.1.100
• D.192.1.2.1

Comment: *

Name: *

Email: *

Verification: *

How is persistence configured.

• A.Persistence is a global setting; once enabled, loElb adlancing choices are superceded by the persistence method that is specified.
• B.Persistence is an option for each pool member. When a pool is defined, each member's definition includes the option for persistence.
• C.Persistence is an option within each pool's definition.
• D.Persistence is a profile type; an appropriate profile is created and associated with virtual server.

Comment: *

Name: *

Email: *

Verification: *

Administrative user accounts have been defined on the remote LDAP server and are unable to log in to the BIG-IP device.
Which log file should the BIG-IP Administrator check to find the related messages?

• A./var/log/messages
• B./var/log/secure
• C./Nar/log/ltm
• D./var/log/user.log

Comment: *

Name: *

Email: *

Verification: *