What is required for a virtual server to support clients whose traffic arrives on the internal VLAN and pool members whose traffic arrives on the external VLAN.

• A.The virtual server must be enabled for both VLANs.
• B.The virtual server must be enabled on the internal VLAN.
• C.That support is never available.
• D.The virtual server must be enabled on the external VLAN.

Comment: *

Name: *

Email: *

Verification: *

Assuming there are open connections through an active system's NAT and aEl fo av ielr occurs, by default, what happens to those connections.

• A.All open connections are lost, but new connections are initiated by the newly actiEl vI eP, BIG resulting in minimal client downtime.
• B.All open connections will be lost.
• C.The "Mirror" option must be chosen on the NAT and the setting synchronized prior to the connection establishment.
• D.LongEllived connections such as Telnet and FTP will be maintained while shortEllived connectio ns such as HTTP will be lost.
• E.All open connections will be maintained.

Comment: *

Name: *

Email: *

Verification: *

A BIG-IP Administrator needs to restore a UCS file to an F5 device using the Configuration Utility. Which section of the Configuration Utility should the BIG-IP Administrator access to perform this task?

• A.Local Traffic > Virtual Servers
• B.System > Configuration
• C.Local Traffic > Policies
• D.System > Archives

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.

During a planned upgrade lo a BIG-IP HA pair running Active/Standby, an outage to application traffic is reported shortly after the Active unit is forced to Standby Reverting the flower resolves the outage. What should the BIG-IP Administrator modify to avoid an outage during the next for over event?

• A.The Tag value on the Active device
• B.The Interface on the Standby device to 1.1
• C.The Tag voice on the Standby device
• D.The interface on the Active device to 1.1

Comment: *

Name: *

Email: *

Verification: *

A BIG-IP Administrator needs to restore an encrypted UCS archive from the command line using the TMSH utility.
Which TMSH command should the BIG-IP Administrator use to accomplish this?

• A.load/sys config file <filepath>
• B.load/sys ucs <filepath> passphrase <password>
• C.load/sys ucs <filepath> no-license
• D.load/sys config file <filepath> passphrase <password>

Comment: *

Name: *

Email: *

Verification: *