In preparation for a maintenance task, an LTM Specialist performs a "Force to Standby" on LTM device Unit 1. LTM device Unit 2 becomes active as expected. The maintenance task requires the reboot of Unit
1. Shortly after the reboot is complete, the LTM Specialist discovers that Unit 1 has become active and Unit 2 has returned to standby.
What would cause this behavior?

• A.Unit 1 is set with the redundancy state preference of active in devices groups.
• B.A device group is configured with Auto Failback, and Unit 1 is the default device.
• C.A traffic group is configured with Auto Failback, and Unit 1 is the default device.
• D.Unit 1 is set with the redundancy state preference of active in high availability.

Comment: *

Name: *

Email: *

Verification: *

An LTM Specialist configured a virtual server to load balance a custom application. The application works when it is tested from within the firewall but it fails when tested externally. The pool member address is 192.168.200.10:80. A capture from an external client shows:
GET /index.jsp HTTP/1.1 Host: 207.206.201.100 User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:15.0) Gecko/20100101 Firefox/15.0.1 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Connection: keep-alive HTTP/1.1 302 Found DatE. Wed, 17 Oct 2012 23:09:55 GMT Server: Apache/2.2.15 (CentOS) Location: http://192.168.200.10/user/home.jsp Content-LengtH. 304 Connection: close
What is the solution to this issue?

• A.Assign a SNAT pool to the virtual server.
• B.Add a Web Acceleration Profile to the virtual server.
• C.Configure a content filter on the backend web server.
• D.Configure redirect rewrite option in the HTTP profile.

Comment: *

Name: *

Email: *

Verification: *

An LTM Specialist is troubleshooting an issue with a new virtual server. When connecting through the virtual server, clients receive the message "Unable to connect" in the browser, although connections directly to the pool member show the application is functioning correctly. The LTM device configuration is:
ltm virtual /Common/vs_https {
destination /Common/10.10.1.110:443
ip-protocol udp
mask 255.255.255.255
pool /Common/pool_https
profiles {
/Common/udp { }
}
translate-address enabled
translate-port enabled
vlans-disabled
}
ltm pool /Common/pool_https {
members {
/Common/172.16.20.1:443 {
address 172.16.20.1
}
}
}
What issue is the LTM Specialist experiencing?

• A.The pool member is marked down by a monitor.
• B.The pool member is marked down administratively.
• C.The virtual server is configured for the incorrect protocol.
• D.The virtual server is disabled on all VLANs.

Comment: *

Name: *

Email: *

Verification: *

An active/standby pair of LTM devices deployed with network failover are working as desired. After external personnel perform maintenance on the network, the LTM devices are active/active rather than active/standby. No changes were made on the LTM devices during the network maintenance.
Which two actions would help determine the cause of the malfunction? (Choose two.)

• A.checking that the configurations are synchronized
• B.checking synchronization of system clocks among the network devices
• C.checking the configuration of the VLAN used for failover
• D.checking the open ports in firewalls between the LTM devices
• E.checking the configuration of the VLAN used for mirroring

Comment: *

Name: *

Email: *

Verification: *

Which command should the LTM Specialist use to determine the current system time?

• A.ntpq -p
• B.date
• C.uname -a
• D.time

Comment: *

Name: *

Email: *

Verification: *