An LTM Specialist must perform a packet capture on a virtual server with an applied standard FastL4 profile. The virtual server 10.0.0.1:443 resides on vlan301.
Which steps should the LTM Specialist take to capture the data payload successfully while ensuring no other virtual servers are affected?

• A.The standard FastL4 profile should have PVA acceleration disabled. Then the packet capture tcpdump
  -ni vlan301 should be executed on the command line interface.
• B.The packet capture tcpdump -ni vlan301 should be executed on the command line interface. There is no need to change profiles or PVA acceleration.
• C.The LTM device is under light load. The traffic should be mirrored to a dedicated sniffing device. On the sniffing device, the packet capture tcpdump -ni vlan301 should be executed.
• D.A new FastL4 profile should be created and applied to the virtual server with PVA acceleration disabled. Then the packet capture tcpdump -ni vlan301 should be executed on the command line interface.

Comment: *

Name: *

Email: *

Verification: *

-- Exhibit -

-- Exhibit --
Refer to the exhibit.
A pair of LTM devices are deployed in a high-availability (HA) pair as the diagram shows. After inserting a new rule on the firewalls, the LTM devices become Standby. The rule drops all outbound sessions to the Internet. Only inbound connections are allowed from the Internet. There are no other changes to the environment.
What triggered the LTM device failover?

• A.VLAN Failsafe
• B.HA Group
• C.Auto Failback
• D.Gateway Failsafe

Comment: *

Name: *

Email: *

Verification: *

-- Exhibit- -- Exhibit -

Refer to the exhibit.
An LTM Specialist sets up AVR alerts and notifications for a specific virtual server if the server latency exceeds 50ms. The LTM Specialist simulates a fault so that the server latency is consistently exceeding the 50ms threshold; however, no alerts are being received.
Which configuration should the LTM Specialist modify to achieve the expected results?

• A.SNMP alerting should be enabled to allow e-mail to be sent to the support team.
• B.The rule should be adjusted to trigger when server latency is above 50ms.
• C.User Agents needs to be enabled to ensure the correct information is collected to trigger the alert.
• D.The metric "Page Load Time" needs to be enabled to ensure that the correct information is collected.

Comment: *

Name: *

Email: *

Verification: *

-- Exhibit -

-- Exhibit --
Refer to the exhibit.
A web application is configured to allow sessions to continue even after a user computer is shut down for the night. A new LTM device is configured to load balance the web application to several servers. The application owner reports that application users are logged out of the web application whenever their browser is restarted or computer is rebooted.
What is the problem?

• A.The cookie set by the server is NOT being passed to client by the LTM device.
• B.The virtual server does NOT have persistence configured.
• C.The virtual server does NOT have persistence mirroring configured.
• D.The cookie set by the LTM device does NOT have an "Expires" value.

Comment: *

Name: *

Email: *

Verification: *

-- Exhibit -

-- Exhibit -Refer to the exhibit.
An LTM Specialist is reviewing the virtual server configuration on an LTM device.
Which two actions should the LTM Specialist perform to minimize the virtual server configuration? (Choose two.)

• A.Remove the 'default_class' from the virtual server.
• B.Combine 'marketing_class' and 'default_class' into one class and update associations on the virtual server.
• C.Remove the 'http' profile from the virtual server.
• D.Remove 'snat automap' from the virtual server.
• E.Combine 'acct_class' and 'marketing_class' into one class and update associations on the virtual server.

Comment: *

Name: *

Email: *

Verification: *