I saw the following debugging information on an MSR router:
*Jan 23 09:17:36:720 2009 H3C RM/6/RMDEBUG:Source Address: 192.168.1.1
*Jan 23 09:17:36:770 2009 H3C RM/6/RMDEBUG:Destination Address: 224.0.0.5
*Jan 23 09:17:36:871 2009 H3C RM/6/RMDEBUG:Ver# 2, Type: 1, Length: 48.
*Jan 23 09:17:36:972 2009 H3C RM/6/RMDEBUG:Router: 192.168.1.1, Area: 0.0.0.0, Checksum: 62961.
*Jan 23 09:17:37:72 2009 H3C RM/6/RMDEBUG:AuType: 00, Key(ascii): 0 0 0 0 0 0 0 0.
*Jan 23 09:17:37:173 2009 H3C RM/6/RMDEBUG:Net Mask: 255.255.255.0, Hello Int: 10, Option: _E_.
Then according to the above information, you can know ______.
An MSR router is connected to the Internet through the S1/0 interface, and the GE0/0 interface is connected to the LAN host. The network segment of the LAN host is 10.0.0.0/8, and there is an FTP server with an IP address of 202.102.2.1 on the Internet.
By configuring the IP address and routing on the router, the hosts in the current LAN can access the Internet normally (including the public network FTP server). Now the following configuration is added to the router:
firewall enable
acl number 3000
rule 0 deny tcp source 10.1.1.1 0 source-port eq ftp destination 202.102.2.1 0
Then apply this ACL to the inbound and outbound directions of the GE0/0 interface, then which of the following intentions can this ACL achieve?
The two MSR routers are connected through the WAN and have dynamically completed remote routing learning through RIPv2. At this time, the routing table has reached a stable state. Then within 45 seconds from this moment, the two routers must have the following messages transmitted between the WAN ?
The following description of the characteristics of VTY in H3C equipment is correct ______.
