Each SCSI channel has a maximum of () SCSI IDs and can connect a maximum of () storage devices:

• A.17/16
• B.14/13
• C.16/15
• D.15/14

Comment: *

Name: *

Email: *

Verification: *

The following modification of virtual switch port information is incorrect.

• A.To modify the host management vswitch address, you need to delete the host from the CVM page.
• B.Changing the host storage vswitch address requires suspending the shared storage pool
• C.Modify the host service vswitch binding physical port can be modified directly on the CVM page
• D.To modify the host management vswitch name, you can directly modify it on the CVM page.

Comment: *

Name: *

Email: *

Verification: *

Regarding storage pools, the following statements are incorrect:

• A.A shared file system can be mounted by multiple servers
• B.NFS network file system can be accessed by multiple servers
• C.There is no limit on the number of hosts that can mount the same shared file system
• D.ISCSI network storage can be assigned to virtual machines after being mounted on the host

Comment: *

Name: *

Email: *

Verification: *

Which of the following statements about configuring a virtual switch is incorrect?

• A.The uplink port of the virtual switch allows all VLANs to pass
• B.The virtual machine uses the vNet0 port of the virtual switch, and the port is configured with VLAN100. Then the physical switch port connected to the virtual switch must allow VLAN100 to pass through, otherwise the virtual machine network will be unavailable.
• C.When adding a virtual switch, you must bind a physical interface, and when binding multiple physical interfaces, you must configure link aggregation mode and load sharing mode.
• D.The storage virtual switch must be configured with a P address, otherwise the CVK host cannot mount the iP SAN storage through the storage virtual switch.

Comment: *

Name: *

Email: *

Verification: *

Which of the following statements about the default gateway is incorrect?

• A.After installing the CAS software, the management network gateway is used as the default gateway by default
• B.The server where the CAS system is installed can be configured with multiple default gateways
• C.If the storage network runs at Layer 3, you need to configure static routing locally
• D.If the storage network does not run Layer 3, there is no need to configure static routing locally

Comment: *

Name: *

Email: *

Verification: *