Free HP HPE0-S51 Exam Dumps Questions & Answers

You are onsite at a customer location to install a new network switch. The customer wants users to be able to manage the switch through the IP network.
How should you connect the switch to the network?

• A.  Configure multiple user IDs or roles for the console connection
• B.  Configure the management IP address on the switch and enable Telnet or SSH access
• C.  Connect the switch to the network by using the serial cable that ships with the switch
• D.  Use a dedicated console cable to create a dedicated management network for every user

You have completed a non-disruptive activation of firmware on an SN6000 switch.
Which session must be restarted manually?

• A.  SAN connection Manager session
• B.  telnet session
• C.  Enterprise Fabric Management Suite session
• D.  QuickTools session

Match the command to the action it initiates on a FlexFabric switch. Not all actions will be used.

Correct Answer:

Explanation
System-view - enter enabled mode
Interface ten 1/0/2 - log in to a port
Port trunk permit VLAN 10 - set port mode to trunk
Port access VLAN 10 - set up a tagged port

A customer needs to create a large RAID set for archive storage on large-capacity drives.
Which RAID level is recommended for this customer?

• A.  RAID 6
• B.  RAID 0
• C.  RAID 1+0
• D.  RAID 5+0

You are installing a HPE StoreOnce backup system in a customer's environment. They need a simple and cost-effective method to centralize and automate the backup of multiple servers (file, virtualization, database).
They also need the ability to integrate with an existing third-party backup software.
How must you configure the StoreOnce system to meet the customer's requirements?

• A.  replication target
• B.  VTL device
• C.  block device
• D.  NDMP target