Free HP HPE6-A66 Exam Dumps Questions & Answers

A company has a warehouse that requires ruggedized APs to provide wireless access The APs need to support these characteristics:
* 2 or more spatial streams
* 802.11 ac and 802.11 n support
Cat 7 Ethernet cabling will be used to connect the APs to POE+ capable switches Link aggregation should be employed between the APs and the Ethernet switches. Which would be the most cost-effective solution that would meet the company's requirements?

• A.  AP 365 with integrated omnidirectional antennas
• B.  AP 510 with external omnidirectional antennas and plastic AP cover
• C.  AP 375 with external omnidirectional antennas
• D.  AP 318 with external omnidirectional antennas

A network architect will be using VisualRF to determine the appropriate wireless coverage for a new wireless design. Seamless, uninterrupted roaming is necessary for this design, since voice will need to be supported. Given these requirements, which information should be used in VisualRF to plan a cost effective solution that meets these requirements?

• A.  Minimum -70db, 1 AP per 2,500 square feet, capacity design
• B.  Minimum -80db, 1 AP per 1,000 square feet, very high-density design
• C.  Minimum -70db. 1 AP per 5,000 square feet, high density design
• D.  Minimum -65db, 1 AP per 2,500 square feet, high density design

NewStellar has a main corporate campus in a business park with two adjacent buildings that are 150 feet apart (46 meters). This is an open campus with no obstructions between the two buildings Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total, which results in a total of 338,100 feet (31,410 square meters) for the entire building space. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters) The network architect has given one floor to analyze. Building 1 Floor 2, shown in the attached exhibit.
This floor has a central main corridor with washrooms, stairs, elevators and supply, and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters).
The company has determined that Wi-Fi coverage will not include the central area of each floor, which includes the washrooms, stairs, elevators and supply and network cabinets. Based on a capacity design, approximately how many APs should a network architect add to each floor to plan the design in VisuaiRF?

• A.  10
• B.  20
• C.  30
• D.  40

When determining a customer's agenda and clarifying their expectations for a new HPE/Aruba deployment, which two questions should be asked during the stakeholder checklist? (Select two.)

• A.  is a request for proposal or actual bill of materials (BOM) required?
• B.  What is the networking experience of onsite personnel?
• C.  What business problems are you trying to solve?
• D.  What is your anticipated growth of the environment?
• E.  Which help desk system is deployed?

A customer is purchasing Aruba 555 APs for a new wireless network. The APs will be pre-staged as campus APs (CAPs) and be managed by a controller solution During the pre-staging process, console access to the APs might be necessary Which console connection cable should the customer purchase for the 555 APs?

• A.  USB-A
• B.  Micro-B USB
• C.  RJ-45
• D.  RS-232