Which statements are true with regards to Strict Priority scheduling? (Select two.)

• A.Strict Priority works best when the network uses the higher priority queues for the majority of applications
• B.Strict Priority scheduling protects against starvation of low priority queues.
• C.Under strict Priority, the port will never forward a packet in a tower priority queue if a higher priority queue includes even one packet.
• D.Strict Priority must be used with egress queue shaping to prevent starvation.

Comment: *

Name: *

Email: *

Verification: *

Refer to the following configuration:

How do you configure QoS policies for user traffic in conjunction with user roles in all wired access switches?
(Select two)

• A.Use NetEdit to replicate the configuration of QoS policies to all wired switches
• B.in a RADIUS server with Aruba Vendor Specific Attribute (VSA) dictionary, you can add QoS policies for user roles.
• C.QoS policies should be configured by the Mobility Controller when you need to set to all wired access switches
• D.With ClearPass and downloadable user roles, you can add QoS policies for user roles

Comment: *

Name: *

Email: *

Verification: *

A customer is installing a new ArubaOS-CX switch The customer does not change the factory default QoS configuration The switch receives an 802.1Q tagged VOIP frame on a port The header contains a DSCP value of EF(46) and the frame has an 802 ip value of 5 How will the switch forward the frame?

• A.Forwards it based on the 802 ip value in the frame
• B.Forwards it based on the DSCP value in the frame
• C.Forwards the frame with best effort forwarding
• D.The switch trusts the settings and It forwards the frame with the current settings

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.

* For all traffic within VLAN 10. a remark action or DSCP value EF must be set
* For all traffic exiting VLAN 10, a remark action of DSCP value AF41 must be set Which is the correct configuration?
A)

B)

C)

D)

• A.Option C
• B.Option D
• C.Option B
• D.Option A

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.

Aruba CX 6300 switch has routes in three different VRFs as per the example above. The user needs to leak routes between VRF Secure and VRF Dev. and also between VRF default and VRF Dev The customer Is not able to establish routing between directly connected networks 10.100.50.0/24 and
10.102.26.0/24 Which statement is true regarding the routing troubleshooting?

• A.Multi-protocol BGP routing needs to be defined for route leaking
• B.Route Distinguisher needs to be set to 1 for default VRF.
• C.Route leaking between default and non-default VRFs is supported with Aruba CX 8400.
• D.Route leaking is supported between non-default VRFs only

Comment: *

Name: *

Email: *

Verification: *