Which statement is correct about when an HPE Partner runs a CloudPhysics assessment of a customer's third-party storage solution?

• A.The HPE Partner must create custom cards to generate an assessment report for the customer.
• B.The HPE Partner and the customer have access to the same cards in CloudPhysics.
• C.The assessment period can last up to 90 days and can be extended for another 90 days.
• D.A premium license must be purchased to assess third-party storage solutions.

Comment: *

Name: *

Email: *

Verification: *

A customer using VMware wants storage provisioning automated directly from vCenter with policy-based management. Which HPE integration feature should be recommended?

• A.HPE OneView
• B.HPE Storage Integration Plugin for VMware vCenter
• C.HPE InfoSight
• D.SNMP traps

Comment: *

Name: *

Email: *

Verification: *

An HPE Partner is sizing an Alletra MP B10000 array for a customer using the HPE Ninja Sizer online tool.
When tuning the solution, the partner is not getting the best read and write performance from the array.
Use your cursor to place a + where the partner can click in the web GUI to begin to determine how to correct this Issue and appropriately size the solution for the customer.

Correct Answer:

Explanation:
Performance Estimation
The HPE Ninja Sizer is a vital tool for storage architects to model the "Performance vs. Capacity" trade-offs of the HPE Alletra MP B10000 disaggregated architecture. In this scenario, the current configuration (as shown in the exhibit) consists of 4 nodes and 1 JBOF (with 8 drives of 15.36TB each).
To address poor read/write performance in Ninja Sizer, the partner must analyze the Performance Estimation pane. By clicking the chart/graph icon in the bottom right of the summary dashboard, the tool opens a detailed breakdown of the IOPS, throughput, and latency limits for the selected hardware. In a disaggregated shared-everything (DASE) architecture like the Alletra MP, performance is a direct function of the "node-to- drive" ratio. A configuration with only 8 drives (as seen in image_6491d0.png) may be "disk-bound," meaning the controllers have more compute power than the backend drive count can support in parallel.
By accessing the performance details, the partner can see if the bottleneck is at the node level (CPU/Cores) or the drive level (Flash bandwidth). To "correct this issue" and optimize the sizing, the partner would typically need to increase the drive count within the JBOF to allow for more parallel I/O streams or add additional JBOFs to scale the backend bandwidth. The Ninja Sizer provides real-time feedback; as the partner adds more
15.36TB drives, they will see the Performance Estimation bars move from yellow/red toward green, indicating an appropriately balanced solution that meets the customer's latency and throughput SLAs.

Comment: *

Name: *

Email: *

Verification: *

An administrator needs to verify that the HPE plug-in was installed in VMware vCenter to correctly integrate with the HPE Alletra storage array. Use your cursor to place a + where the administrator can click to verify the plug-in installation.

Correct Answer:

Explanation:
Configure
In a VMware vSphere environment, integrating HPE Alletra storage typically involves the installation of the HPE Storage Peer Motion Utility or the HPE Storage Connection Manager for VMware, which provides the VASA (vSphere APIs for Storage Awareness) provider functionality. This integration allows vCenter to manage storage arrays directly for tasks such as provisioning Virtual Volumes (vVols) and monitoring storage health.
According to the HPE Alletra Integration Guide for VMware, after the plug-in or provider is registered with vCenter, an administrator can verify its status through the vSphere Client UI. As shown in the exhibit (image_64a7b7.png), the administrator is currently viewing the Storage Providers section under the Configure tab of the vCenter object. This specific view is the correct location to verify that the HPE VASA provider is active and communicating. The list under "Storage Provider/Storage System" should show the Alletra array's URL and a status of "Active" or "Online." If the administrator wants to verify the registration of the UI-based plug-in itself (which adds specific HPE menus and dashboards), they should click the three dots (...) at the end of the navigation bar. This reveals additional hidden tabs where specialized vendor extensions, such as the HPE Storage dashboard, are located.
Successful installation is confirmed if the HPE-specific provider is listed with a valid certificate and the "Last Rescan" time is current. Failure to see the provider in this list indicates that the registration process (typically performed via the array's management console or a separate appliance) was not completed successfully, which would prevent the use of advanced features like Storage Policy Based Management (SPBM).

Comment: *

Name: *

Email: *

Verification: *

A customer wants to reduce ransomware risk by ensuring backup copies are immutable and isolated from the production environment. Which architecture best addresses this requirement?

• A.RAID 6 arrays
• B.HPE StoreOnce with Catalyst immutable backups
• C.Thin provisioning
• D.Fibre Channel zoning

Comment: *

Name: *

Email: *

Verification: *