Two community filters are configured as follows:
ip community-filter 1 permit 100:1 200:1
ip community-filter 2 permit 100:1
ip community-filter 2 permit 200:1
Which of the following statements regarding the community filters are true? (Choose two.)

• A.A BGP route matches community-filter 2 only when it carries the Community attribute values of 100:1 and
  200:1, or both.
• B.A BGP route matches community-filter 1 only when it carries the Community attribute values of 100:1 and
  200:1.
• C.A BGP route matches community-filter 2 only when it carries the Community attribute values of 100:1 and
  200:1.
• D.A BGP route matches community-filter 1 only when it carries the Community attribute value of 100:1 or
  200:1, or both.

Comment: *

Name: *

Email: *

Verification: *

To deploy multicast video applications on your private internal network, you need to use private multicast IP addresses on the network.
Which range of IP addresses can be used?

• A.239.0.0.0 - 239.255.255.255
• B.240.0.0.0 - 254.255.255.255
• C.224.0.0.0 - 224.255.255.255
• D.241.0.0.0 - 241.255.255.255
• E.226.0.0.0 - 226.255.255.255

Comment: *

Name: *

Email: *

Verification: *

What is correct about the following description? Filter-policy

• A.Filter-Policy can receive or route the information line to filter the chain status, and modify the attributes of the route
  entry.
• B.Pre-use list When route filtering is applied, the entry ip ip-prefix 1 deny 0.0.0.0 0 less-equal 32 means
  that only the default route is matched.
• C.The previous list can be used for both route suffix filtering and packet filtering.
• D.In the middle, Filter-Policy, OSPF ASBR type 5 LSA type 7 LSA can be generated for filtering

Comment: *

Name: *

Email: *

Verification: *

You have been tasked with summarizing the addressing so it can be espressed in the shortest form possible.
The IPv6 address of 2013:0000:130F:0000:0000:09C0:876A:130B can be expressed most efficiently as which of the following?

• A.2013:0:130F:0:0:09CO:876A:130B
• B.2013:: 130F: :9C0:876A: 130B
• C.2013:0:130F:0:0:9C0:876A:130B
• D.2013;0:130F::9C0:876A:130B
• E.213::13F::9C:876A:13B

Comment: *

Name: *

Email: *

Verification: *

The following is a cross-domain approach to MPLS VPN, which describes the error.

• A.For the inter-domain vPN-OptionB, the ASBR MP-eBGP mode needs to establish a neighbor
  relationship.
• B.For the inter-domain vPn -OptionA, the routes of the ASBR IPv4 mode are ordinary inter-route routes.
• C.LDP, vp-Option-c 2 when only the label is used on the public network. For the cross-domain solution,
  the third-layer forwarding layer label is required.
• D.For inter-domain vPN-OptionB, ASBR-E ( ), VPN, two methods, use multiple interfaces, including
  sub-interfaces, interconnect each interface, one each.
  ASBR-PE CE

Comment: *

Name: *

Email: *

Verification: *