The following statement about the region is correct (Select 3 Answers)?

• A.AP region is laid in three types: dense placement, discrete deployment, and normal deployment.
• B.An AP can belong to two regions at the same time, so that roaming is more optimized.
• C.If you do not configure, all APs belong to region 0 by default.
• D.APs belonging to the same region will uniformly adjust the RF channel and power.

Comment: *

Name: *

Email: *

Verification: *

The following description of the management VLAN is correct.

• A.PVID VLAN under WLAN ESS interface
• B.Responsible for establishing the CAPWAP tunnel between the AC and the AP.
• C.Mainly responsible for transmitting data when WLAN users access the Internet
• D.Service VLAN under the service set template

Comment: *

Name: *

Email: *

Verification: *

What are the ways for APs to automatically discover ACs? (Multiple choice)

• A.Through the DHCP server mode
• B.Broadcast access
• C.Through the DNS server mode
• D.Multicast access

Comment: *

Name: *

Email: *

Verification: *

How many management nodes can be supported by eSight standard edition?

• A.20000
• B.5000
• C.2000
• D.60

Comment: *

Name: *

Email: *

Verification: *

According to the following configuration example, the following statement is correct.
[AC] dhcp enable
[AC] interface VLANif100
[AC-VLANif100] ip address 10.1.100.1 24
[AC-VLANif100] dhcp select interface
[AC-VLANif100] quit

• A.If VLAN 100 is a user VLAN, the gateway is 10.1.100.1 and the mask is 255.255.255.0 after the user receives the address.
• B.If VLAN 100 is the management VLAN where the AP is located, the option 43 field in the DHCP message received by the AP should be 10.1.100.1.
• C.The DHCP service is enabled by default in the global mode, so the dhcp enable can be configured.
  The
• D.dhcp select interface command enables the DHCP client function on the interface of VLAN 100.

Comment: *

Name: *

Email: *

Verification: *