Huawei plug-in controller ACU Board manageable AP What is the maximum number of ()?

• A.128
• B.1024
• C.256
• D.512

Comment: *

Name: *

Email: *

Verification: *

exist 802.11 In the frame, which type of message is used by the terminal to receive data packets in the power-saving mode?

• A.PS-Poll
• B.CTS
• C.ACK
• D.RTS

Comment: *

Name: *

Email: *

Verification: *

According to the following configuration example, the following statement is correct ().
[AC] dhcp enable
[AC] interface VLANif100
[AC-VLANif100] ip address 10.1.100.1 24
[AC-VLANif100] dhcp select interface
[AC-VLANif100] quit

• A.The dhcp select interface command is to enable the DHCP client function on the VLAN 100 interface
• B.If VLAN100 is the management VLAN where the AP is located, the option 43 field in the DHCP message that the AP will receive should be 10.1.100.1
• C.If VLAN100 is a user VLAN, after the user receives the address, the gateway is 10.1.100.1 and the mask is 255.255.255.0
• D.The DHCP service is already enabled by default in the global mode, so dhcp enable does not need to be configured

Comment: *

Name: *

Email: *

Verification: *

service-set What are the options that can be configured under ()? (Select 3 Answers)

• A.Can call wlan-ess Interface and configuration service-vlan
• B.Can be bound wmm-profile
• C.able to pass ssid xxxx Configuration SSID String
• D.The forwarding mode can be configured as direct-forward or tunnel-forward

Comment: *

Name: *

Email: *

Verification: *

exist WLAN In the networking configuration, finally AC6605 What command must be executed to send the configuration to AP1 middle()?

• A.save config ap 1
• B.commit ap 1
• C.save ap 1 config
• D.save ap id 1

Comment: *

Name: *

Email: *

Verification: *