| Exam Code/Number: | H12-811_V2.0Join the discussion |
| Exam Name: | HCIA-Datacom V2.0 |
| Certification: | Huawei |
| Question Number: | 140 |
| Publish Date: | Oct 21, 2026 |
|
Rating
100%
|
|
Which of the following IP addresses cannot be configured for a host by default?
If a network device has both a static route and a direct route to network 10.1.1.0/24, it uses the direct route preferentially.
On the campus network shown in the figure below, the core switch Core1 functions as a Layer 3 gateway and as a DHCP server to dynamically assign IP addresses to AP1, PC1, PC2, and PC3. The network below Core1 is a Layer 2 network. WAC1 and R1 are connected to Core1 at Layer 3. AP1 goes online through VLAN 100.
The wireless service VLAN is VLAN 101, and the wired service VLANs for PC2 and PC3 are VLAN 102 and VLAN 103, respectively. Additionally, the direct forwarding mode is used for wireless traffic forwarding.
If no additional VLANs are allowed on device interfaces, which of the following VLANs must be allowed on GE1/0/1 of ACC1? (Select all that apply)
To ensure that the same data flow can be forwarded through the same physical link in a link aggregation group (LAG) and different data flows can be load balanced among different physical links in the LAG, the administrator needs to enable per-packet load balancing on the devices at both ends of the LAG.
Which of the following commands can be used to enable OSPF on the loopback interface (10.0.1.1/32) of R1?
(Select all that apply)
