Free Juniper JN0-101 Exam Dumps Questions & Answers

The authentication order configuration on your M120 includes the settings tacplus and radius (in that order), but does not include the password parameter. You attempt to log in to the device, but the network containing the authentication servers is currently down.
Which statement is true about your login attempt?

• A.  The M120 automatically tries authenticating locally on the device after the authentication servers' timeout value is reached.
• B.  The M120 automatically tries authenticating locally on the device before using external authentication.
• C.  The login attempt is rejected.
• D.  The login attempt is automatically accepted after the authentication servers' timeout value is reached, since there are no other authentication methods available.

Which two statements accurately describe a broadcast domain? (Choose two.)

• A.  Broadcast domains require that the participating devices connect to common switches or hubs.
• B.  Broadcast domains require a gateway device such as a router.
• C.  Broadcast domains consist of devices reachable by frames addressed to the Layer 2 broadcast address.
• D.  Broadcast domains consist of devices that reside on the same VLAN.

-- Exhibit -
user@router> show route
inet.0: 9 destinations, 9 routes (9 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
10.10.10.91/32 *[Direct/0] 00:09:40 > via lo0.0 10.10.10.92/32 *[OSPF/10] 00:01:50, metric 1 > to 172.16.1.2 via ge-0/0/2.0 100.100.1.0/24 *[Static/5] 00:01:50 Reject 172.16.1.0/24 *[Direct/0] 00:06:09 > via ge-0/0/2.0 172.16.1.1/32 *[Local/0] 00:06:09 Local via ge-0/0/2.0 192.168.0.0/16 *[Aggregate/130] 00:00:06 Reject 192.168.0.0/17 *[Aggregate/130] 00:00:06 > to 172.16.1.2 via ge-0/0/2.0 192.168.50.0/24 *[Static/5] 00:00:06 > to 172.16.1.2 via ge-0/0/2.0 192.168.51.0/24 *[Static/5] 00:00:06 > to 172.16.1.2 via ge-0/0/2.0
user@router> show configuration policy-options
policy-statement demo { term 1 { from { protocol aggregate; route-filter 192.168.0.0/16 longer;
}
then accept;
}
}
user@router> show configuration protocols ospf
export demo;
area 0.0.0.0 {
interface ge-0/0/2.0;
}
-- Exhibit --
Given the configuration and routing table shown in the exhibit, which routes will be advertised to OSPF neighbors because of the demo policy?

• A.  192.168.0.0/17 only
• B.  192.168.0.0/17, 192.168.50.0/24, and 192.168.51.0/24
• C.  192.168.0.0/16 and 192.168.0.0/17
• D.  192.168.0.0/16 only

Which statement is true regarding the Junos OS?

• A.  All platforms running the Junos OS have identical factory-default configurations.
• B.  All platforms running the Junos OS use FXP1 for communication between control and forwarding planes.
• C.  All platforms running the Junos OS use the same source code base.
• D.  All platforms running the Junos OS use the IP2 processor for longest-match lookup.

Referring to the exhibit, you are asked to rate-limit traffic from Web-Server to the subnet where Mal-User is located. All other traffic should be permitted.
Which firewall filter configuration do you use?

• A.  [edit firewall]
  user@router# show
  policer LIMIT-BAD-USER {
  if-exceeding {
  bandwidth-limit 400k;
  burst-size-limit 100k;
  }
  then discard;
  }
  family inet {
  filter STOP-MAL-USER {
  term one {
  from {
  source-address {
  100.100.100.10/32;
  }
  destination-address {
  200.200.200.0/24;
  }
  }
  then policer LIMIT-MAL-USER;
  }
  term two {
  then accept;
  }
  }
  }
• B.  [edit firewall]
  user@router# show
  policer LIMIT-MAL-USER {
  if-exceeding {
  bandwidth-limit 400k;
  burst-size-limit 100k;
  }
  then discard;
  }
  family inet {
  filter STOP-MAL-USER {
  term one {
  from {
  source-address {
  100.100.100.10/32;
  }
  destination-address {
  200.200.200.0/24;
  }
  }
  then policer LIMIT-MAL-USER;
  }
  term two {
  then accept;
  }
  }
  }
• C.  [edit firewall]
  user@router# show
  policer LIMIT-MAL-USER {
  if-exceeding {
  bandwidth-limit 400k;
  burst-size-limit 100k;
  }
  then discard;
  }
  family inet {
  filter STOP-MAL-USER {
  term one {
  from {
  source-address {
  100.100.100.10/32;
  }
  destination-address {
  200.200.200.0/24;
  }
  }
  then policer LIMIT-MAL-USER; } term two { then reject; } } }
• D.  [edit firewall]
  user@router# show
  policer LIMIT-MAL-USER {
  if-exceeding {
  bandwidth-limit 400k;
  burst-size-limit 100k;
  }
  then discard;
  }
  family inet {
  filter STOP-MAL-USER {
  term one {
  from {
  source-address {
  200.200.200.0/24;
  }
  destination-address {
  100.100.100.10/32;
  }
  }
  then policer LIMIT-MAL-USER;
  }
  term two {
  then accept;
  }
  }
  }