Referring to the exhibit, you want to block HTTP access to Web-Server from the subnet where Mal-User is located. All other traffic should be permitted.

Which firewall filter configuration do you use?

• A.[edit firewall family inet filter STOP-MAL-USER] user@router# show term one { from { source-address { 100.100.100.0/24; } destination-address { 200.200.200.1/32; } protocoltcp; destination-port http; } then reject; } term two { then { accept; } }
• B.[edit firewall family inet filter STOP-MAL-USER] user@router# show term one { from { source-address { 200.200.200.0/24; } destination-address { 100.100.100.10/32; } protocoltcp; destination-port http; } then reject; } term two { then { accept; } }
• C.[edit firewall family inet filter STOP-MAL-USER] user@router# show term one { from { source-address { 200.200.200.0/24; } destination-address { 100.100.100.10/32; } protocoltcp; destination-port http; } then accept; } term two { then { reject; } }
• D.[edit firewall family inet filter STOP-MAL-USER] user@router# show term one { from { source-address { 100.100.100.0/24; } destination-address { 200.200.200.1/32; } protocoltcp; destination-port http; } then accept; } term two { then { reject; } }

Comment: *

Name: *

Email: *

Verification: *

What are three acceptable modifiers to a terminating action on a firewall filter? (Choose three.)

• A.syslog
• B.log
• C.discard
• D.policer
• E.count

Comment: *

Name: *

Email: *

Verification: *

Which of these must be configured prior to the first commit after factory defaults are loaded?

• A.management services
• B.default gateway
• C.root authentication
• D.hostname

Comment: *

Name: *

Email: *

Verification: *

What is the network ID address of the IPv4 subnet that includes the IP address 114.180.192.120/28?

• A.114.180.192.100/28
• B.114.180.192.112/28
• C.114.180.192.106/28
• D.114.180.192.118/28

Comment: *

Name: *

Email: *

Verification: *

What is the purpose of a network mask?

• A.It is used to identify the maximum hop count of a subnetwork.
• B.It is used to identify the network to which an IP address belongs.
• C.It is used to identify the total number of bits present in an IP address.
• D.It is used to identify an IP address as either private or public.

Comment: *

Name: *

Email: *

Verification: *