Free Juniper JN0-660 Exam Dumps Questions & Answers

-- Exhibit -

-- Exhibit -
Click the Exhibit button.
Referring to the exhibit, you have recently configured a Layer 3 VPN between Site 1, Site 2, and Site 3. The CE2 device has all routes from Site 1 and Site 3. The CE3 device has all the routes from Site 1 and Site 3. CE1 is not receiving any routes from either Site 2 or Site 3.
Which statement is correct?

• A.  OSPF is not a supported PE to CE routing protocol.
• B.  PE2 must redistribute the routes into OSPF using a VRF export policy.
• C.  You must create an export policy on PE1 to redistribute the VPN routes into OSPF.
• D.  You must configure a sham link between all three sites.

Click the Exhibit button.

In the exhibit, Area 1 and Area 2 are configured as not-so-stubby areas. RIP network 192.168.100.0/24 is redistributed into OSPF in Area 1.Which three statements are true? (Choose three.)

• A.  Area 2 does not see the network 192.168.100.0/24 in its link-state database.
• B.  The area border router between Area 0 and Area 2 converts network 192.168.100.0/24 to a Type 7 LSA.
• C.  Network 192.168.100.0/24 is advertised in a Type 7 LSA in Area 0.
• D.  Network 192.168.100.0/24 is advertised in a Type 7 LSA in Area 1.
• E.  Network 192.168.100.0/24 is advertised in a Type 5 LSA in Area 0.

Click the Exhibit button.

A customer is using the Layer 3 VPN multicast technology shown in the exhibit. Which statement is true?

• A.  PE6 sends a BGP NG-MVPN NLRI Type 5 message upon receiving a *,G join on its VRF interface.
• B.  PE6 signals PE2 through MBGP to include the I-PMSI tree on its P2MP sub LSP.
• C.  PE6 sends a BGP NG-MVPN NLRI Type 7 message upon receiving an S,G join on its VRF interface.
• D.  The P2MP sub LSP reduces the traffic load on the interface between PE2 and PE5.

You have assigned target:65432:100 as the route target for Customer A's BGP Layer 2 VPN. The PE1 router VRF is configured with vrf-target export target:65432:100.Which configuration on PE2 correctly assigned Customer A's routes to their VRF?

• A.  route-target target:65432:100
• B.  vrf-target target:65432:100
• C.  vrf-target export target:65432:100
• D.  route-target export target:65432:100

-- Exhibit -user@router> show route receive-protocol rip 2.2.2.2
inet.0: 15 destinations, 15 routes (15 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
50.50.0.0/26 *[RIP/100] 00:09:12, metric 2, tag 0 > to 2.2.2.2 via fe-3/0/0.2 50.50.1.0/24 *[RIP/100] 00:32:24, metric 2, tag 0 > to 2.2.2.2 via fe-3/0/0.2 50.50.2.0/24 *[RIP/100] 00:32:24, metric 2, tag 0 > to 2.2.2.2 via fe-3/0/0.2 50.50.3.0/25 *[RIP/100] 00:32:24, metric 2, tag 0 > to 2.2.2.2 via fe-3/0/0.2 50.50.4.0/25 *[RIP/100] 00:32:24, metric 2, tag 0 > to 2.2.2.2 via fe-3/0/0.2 50.50.4.128/25 *[RIP/100] 00:32:24, metric 2, tag 0 > to 2.2.2.2 via fe-3/0/0.2 50.50.5.0/26 *[RIP/100] 00:32:24, metric 2, tag 0 > to 2.2.2.2 via fe-3/0/0.2 50.50.5.64/26 *[RIP/100] 00:32:24, metric 2, tag 0 > to 2.2.2.2 via fe-3/0/0.2 50.50.5.128/26 *[RIP/100] 00:32:24, metric 2, tag 0 > to 2.2.2.2 via fe-3/0/0.2
-- Exhibit -
Click on the Exhibit button.
Referring to the exhibit, how should an export policy be configured to export only the 50.50.1.0/24 RIP summary route into OSPF?

• A.  [edit policy-options policy-statement RIP-redist]
  user@router# show
  term 1 {
  from {
  protocol rip;
  route-filter 50.50.0.0/16 prefix-length-range /24-/26;
  }
  then reject;
  }
  term 2 {
  from {
  protocol rip;
  route-filter 50.50.1.0/24 exact;
  }
  then accept;
  }
• B.  [edit policy-options policy-statement RIP-redist]
  user@router# show
  term 1 {
  from {
  protocol rip;
  route-filter 50.50.1.0/24 exact;
  }
  then accept;
  }
  term 2 {
  from {
  protocol rip;
  route-filter 50.50.0.0/24 upto /27;
  }
  then reject;
  }
  term 3 {
  from protocol rip;
  then accept;
  }
• C.  [edit policy-options policy-statement RIP-redist]
  user@router# show
  term 1 {
  from {
  protocol rip;
  route-filter 50.50.1.0/24 exact;
  }
  then accept;
  }
  term 2 {
  from {
  protocol rip;
  route-filter 50.50.0.0/16 prefix-length-range /24-/26;
  }
  then reject;
  }
• D.  [edit policy-options policy-statement RIP-redist]
  user@router# show
  term 1 {
  from {
  protocol rip;
  route-filter 50.50.0.0/24 upto /27;
  }
  then reject;
  }
  term 2 {
  from {
  protocol rip;
  route-filter 50.50.1.0/24 exact;
  }
  then accept;
  }
  term 3 {
  from protocol rip;
  then accept;
  }