You are preparing an sFlow monitoring system configuration.
In this scenario, what Information will be included in the datagram sent to the sFlow collector? (Choose two.)

• A.the interlace through which the packets entered the agent
• B.the sending device's serial number
• C.the CRC from the sampled packet
• D.the source and destination VLAN for sampled packets

Comment: *

Name: *

Email: *

Verification: *

You want to convert an MX Series router from a VXLAN Layer 2 gateway to a VXLAN Layer 3 gateway for VNI 100. You have already configured an IRB interface. In this scenario, which command would you use to accomplish this task?

• A.set protocols isis interface irb.100 passive
• B.set vlans VLAN-100 13-interface irb.100
• C.set bridge-domains VLAN-100 routing-interface irb.100
• D.set protocols ospf area 0.0.0.0 interface irb.100 passive

Comment: *

Name: *

Email: *

Verification: *

Exhibit.

Both DC and DC2 ate using EVPN-VXLAN technology deployed using an ERB architecture. A server on the Red VLAN must communicate with a server on the Green VLAN. The Blue VLAN in DC and DC2 needs to be the same VLAN.
Which statement is correct in this scenario?

• A.The eight spine devices must be configured as border spine devices; a full mush interconnect must exist between all eight spine devices and the Blue VLAN must be stitched together
• B.An interconnect is required between the four SRX Series devices; the Blue VLAN must be stretched and a transit VNI must be added for the Red and Green VLANs.
• C.An interconnect is required between four leaf devices in the services blocks; the Red VLAN and the Green VLAN must be stitched and the Blue VLAN must be stretched.
• D.A lean super spine device must be added to DC and DC2; all VLANs must be stretched to the lean super spine device and the lean super spine devices must stitch all the VLANs together.

Comment: *

Name: *

Email: *

Verification: *

You are deploying an IP fabric using EBGP and notice that your leaf devices areadvertising and receiving all the routes. However, the routes are not installed in the routing table and are marked as hidden.
Which two statements describe how to solve the issue? (Choose two.)

• A.You need to configure as-override.
• B.You need to configure a next-hop self policy.
• C.You need to configure loops 2.
• D.You need to configure multipath multiple-as.

Comment: *

Name: *

Email: *

Verification: *

Exhibit.

A VXLAN tunnel has been created between leaf1 and Ieaf2 in your data center. Referring to the exhibit, which statement is correct?

• A.Traffic sent from server1 to server2 will be dropped on Ieaf2.
• B.Traffic sent from server1 to server2 will be tagged with VLAN ID 200 on Ieaf2 and forwarded to server2.
• C.Traffic sent from server1 to server2 will be dropped on leaf1.
• D.Traffic sent from server1 to server2 will be tagged with VLAN ID 100 on Ieaf2 and forwarded to server2.

Comment: *

Name: *

Email: *

Verification: *