Free Microsoft 074-338 Exam Dumps Questions & Answers

DRAG DROP You support Microsoft Lync Server 2013 servers for an international company. The main office is located in New York and the datacenter is located in Seattle. All users in the New York office are using virtual desktops running on servers that are located in the Seattle datacenter. You enable and configure the Enhanced 9-1-1 (E9-1-1) emergency notification feature for the main office users. Users report that the Lync client always displays Seattle as their location. You need to ensure that Lync clients for users in the main office display their location accurately. Which four steps should you perform in sequence? (To answer, move the appropriate four actions from the list of actions to the answer area and arrange them in the correct order.)

Correct Answer:

Explanation:
Box 1: Remove the Seattle network location from the location database.
Box 2: Update the location database with port information.
Box 3: Validate the new locations
Box 4: Publish the location database. Note:
*To enable clients to automatically detect their location within a network, you first need to configure the location database. If you do not configure a location database, and Location Required in the location policy is set to Yes or Disclaimer, the user will be prompted to manually enter a location. To configure the location database, you will perform the following tasks:
*To automatically locate clients within a network, you first need to populate the location database with a network wiremap, which maps network elements to civic (that is, street) addresses. You can use subnets, wireless access points, switches, and ports to define the wiremap. You can add addresses to the location database individually, or in bulk by using a CSV file that contains the column formats described in the following table. Reference: Configure the Location Database

You support a customer whose network environment includes Microsoft Lync Server 2013. A user reports that when he attempts to dial out to a public switched telephone network (PSTN) number, he receives the following message: "Your organization does not support calling this number." All other users are able to call the same number. You verify that the user is able to dial other Lync users in the network. You need to ensure that the user is able to dial out to PSTN numbers. What should you do?

• A.  Change the associated normalization rule in the dial plan policy.
• B.  Modify the voice policy for this user for PSTN usage.
• C.  Make sure the session initiation protocol (SIP) provider is sending the invite to a Mediation Server.
• D.  Open outbound TCP port 5061 on the user's computer.

You are a member of the CsAdministrator group that supports the Microsoft Lync 2013 datacenter for the Contoso company. The Contoso datacenter has 65,000 users. The datacenter has two pools, named ConPool01 and ConPool02. Both pools run Microsoft Lync Server 2013. The Central Management Store is hosted on ConPool01. The servers that run ConPool01 suffer a catastrophic failure. You want users hosted on ConPool01 to be supported permanently on ConPool02. You need to fail over ConPool01. What should you do?

• A.  Run the Invoke-CsPoolFailover PowerShell cmdlet.
• B.  Run the Set-CsConfigurationStoreLocation cmdlet.
• C.  Run the Install-CsDatabase PowerShell cmdlet, and then the Move- CsManagementServer cmdlet.
• D.  Run the Get-CsDatabaseMirrorState cmdlet, and then the Invoke-CSManagementServerFailover PowerShell cmdlet.

Your customer's company has a main office and five branch offices located in different cities. Your customer has a Microsoft Lync Server 2013 datacenter configured with Enterprise Voice at the main office. The customer has deployed a Survivable Branch Appliance (SBA) at the first branch office and connected it to a public switched telephone network (PSTN) by using a Tl trunk line provided by your service provider. The gateway is configured to use fully qualified domain names (FQDNs). All functionality has been tested by using pilot users at the branch office. The customer reports that they tested branch isolation by disconnecting the wide area network (WAN) from their branch office and making an outbound call. The call was successful. Next, they made an inbound call to the branch office and the call failed. To troubleshoot the issue, you begin a trace of IncomingAndOutgoingCalls by using centralized logging, and make an inbound call. You open the log in snooper and search for incoming calls with the phone number from which you are calling. You do not find any messages. You open the syslog from the gateway side of the SBA and discover that messages are sent to the Lync Mediation server pool, but no responses have been received. You connect the WAN from the branch office and make an inbound call. The call is successful. Your investigation suggests that there is a configuration error on the Gateway side of the SBA. You need to identify the configuration error that causes inbound calls to fail. What should you check?

• A.  The domain controller at the branch office
• B.  Dynamic Host Configuration Protocol (DHCP) options on the branch DHCP server
• C.  DNS settings on the gateway
• D.  Route settings of the gateway

You support a customer whose network environment includes Microsoft Lync Server 2013 Standard Edition deployed with an Edge Server that is connected to the Internet. A user reports that when he tries to share a Microsoft PowerPoint presentation in a Lync conference, external users receive the following error message: "Some sharing features are unavailable due to server connectivity issues." You ask the customer to run the Get-OfficeWebAppsFarm cmdlet on the Office Web Application Companion (WAC) server. He provides the following result: You need to ensure that external users are able to share and view PowerPoint presentations in Lync meetings. What should you do?

• A.  Set the InternalUrl parameter on the WAC server and publish to the Internet by using a reverse proxy.
• B.  Set the ExternalUrl parameter on the WAC server and publish to the Internet by using a reverse proxy.
• C.  Install WAC on the Edge Server.
• D.  Install WAC on the Front End pool.