Free Network Appliance NS0-504 Exam Dumps Questions & Answers

What should you do to test NetApp storage controller failover in a high availability FC environment?

• A.  pull FC cables connecting the storage controller to the FC switch
• B.  issue the takeover command on either storage controller
• C.  shut down the FC switch in the fabric that the storage controller is attached to
• D.  shut down FC ports on the FC switch that the storage controller is attached to

What happens when two aggregates are rejoined?

• A.  One of the aggregates will be overwritten and you will lose any data changed on it after the split.
• B.  You will have a large new aggregate containing all volumes from both aggregates.
• C.  Both aggregates revert to the last common snapshot before the split.
• D.  Data ONTAP will always retain data from the newest aggregate.
• E.  It is not possible to rejoin aggregates.

Which command is used to set the configuration of an Ethernet network interface?

• A.  sysconfig - v
• B.  netstat - i
• C.  ifconfig
• D.  ifstat

A company has FC patch panels in their data center. They plan on using them to interconnect their storage controllers to the FC switches and the hosts using the storage. They have 62.5 micron cable between the patch panels. Which cable should you use on the NetApp storage controller's Target Ports to make this a supported configuration?

• A.  long wave SFPs, 62.5 micron FC cable
• B.  long wave SFPs, 50 micron FC cable
• C.  short wave SFPs, 50 micron FC cable
• D.  short wave SFPs, 62.5 micron FC cable

The Space Guarantee option needs to be set__________ to ensure a volume cannot be affected by other volumes storage usage.

• A.  None
• B.  Reserved
• C.  Enabled
• D.  Volume