You want to connect a NetApp AFF A700 to a 32 Gb FC switch. The ports need to connect at 32 Gb speed.
In this scenario, which statement is correct?

• A.The AFF A700 includes an additional FC I/O module that is already populated in each controller.
• B.The AFF A700 includes FC ports natively on the controller.
• C.You need to purchase a two-port or four-port unified I/O module that enables FC and Ethernet connectivity.
• D.You need to purchase a two-port or four-port FC I/O module.

Comment: *

Name: *

Email: *

Verification: *

You plan to use Foreign LUN Import (FLI) to migrate data from an older storage array to an ONTAP cluster. You have properly cabled the storage array and the NetApp nodes to your dual-fabric SAN.
Which two steps are required for this migration and cutover? (Choose two.)

• A.Add NetApp WWN initiator ports to the existing zones.
• B.Create two zones that contain NetApp initiator ports and the source storage target ports, one for each fabric.
• C.Add NetApp WWN target ports to the existing zones so that your hosts can access both storage arrays.
• D.Create two zones that contain the NetApp target ports and the host initiators ports, one for each fabric.

Comment: *

Name: *

Email: *

Verification: *

You have a 4-node FAS8200 A300 cluster that are using ONTAP 9.3 default settings. For faster performance, you move a volume with LUNs from a node on the FAS8200 to a node on the AFF A300. You determine that your SAN host is still using all active/optimized FC paths to the FAS8300 HA pair.
What do you need to troubleshoot to move all active/optimized FC paths to the AFF A300 HA pair?

• A.host MPIO and ALUA
• B.reporting nodes list
• C.igroup WWPNs
• D.LUN mapping

Comment: *

Name: *

Email: *

Verification: *

You ate deploying an 8-node FAS8200 ONTAP cluster and attaching to an existing FC fabric.
Which two ONTAP features would be used to restrict or limit the available paths seen from the host? (Choose two.)

• A.VIAN
• B.port sets
• C.igroup
• D.Selective IUN Map

Comment: *

Name: *

Email: *

Verification: *

You are asked to configure a small environment for a branch office. The customer has two new VMware ESXI hosts and a Netapp FAS2750 for the site. They want to allocate 10 GB for their ISCSI network to be used for datastores. However, they do not want to purchase any new switches for the environment. In this scenario, Which statement is correct?

• A.The SMB protocol will need to be used
• B.10 GB switches are required for this configuration
• C.The environment will have to be configured with 1 GB networking
• D.Configure direct attached connections between the two hosts and storage

Comment: *

Name: *

Email: *

Verification: *