Please read this scenario prior to answering the question
Your role is that of a consultant to the Lead Enterprise Architect in a company that develops wind turbines for use in wind farms. The company has three manufacturing facilities, one in North America, one in Asia, and one in Europe. Each of these facilities supplies the power industry in its region.
The company recognizes that the long-term technical potential of wind energy can address the current global dependency on carbon fuels, in order to do so this will require wind turbines to be installed over the large areas and in areas of higher wind resources. In particular offshore wind farms can contribute substantially more energy than land stationed turbines.
The research arm of the company has pioneered the development of an offshore wind turbine design, with an improved turbine blade and power system, that will produce up to 20% more energy. This will allow the production of significantly more salable energy. This new design is ready to go into production.
The company has a mature Enterprise Architecture practice supported by a cross-functional Architecture Board and uses the TOGAF standard. The Chief Information Officer and the Chief Operating Officer co- sponsor the Enterprise Architecture program.
As part of putting the new design into production, a pilot architecture project has defined an updated standard approach for controlling the automated test systems used to perform final quality assurance. The Chief Engineer, sponsor of the activity, and the Architecture Board have approved the plan for immediate implementation at each plant.
Architecture Contracts have been developed that detail the work needed to implement and deploy the new automated test system controller for each location. The Chief Engineer has expressed concern that a uniform process be employed at each location to ensure consistency and a low blade failure rate.
Refer to the Scenario
You have been asked to recommend the best approach to address the Chief Engineer's concern.
Based on the TOGAF Standard, Version 9.2, which of the following is the best answer?
Dante Manufacturing is a big supplier in the automotive industry, head quarter in London with main plants in
New York, Milan, Toronto and Tokio. Each one of these plants has been operating its own Manufacturing
Requirements Planning (MRP II) system, production scheduling and custom applications for production
automation. Dante's objective is to minimize waste production improving production operations. During an
analysis of the process improvements was determined that a significant improvement on waste production
could be achieved replacing the outdated MRPII system with a common Enterprise Resource Planning (ERP)
located in London. Dante has well-developed governance and processes based on TOGAF 9. The Chief
Engineer of Global Manufacturing operations is the business sponsor and issued a Request for Architectural
Work. The architectural activity for the implementation of the new ERP platform is kicked off and the
architectural vision is produced. Some concerns on the security, reliability, responsibility and time to manage
change of driving the MRP II and production scheduling by a central system located in London are raised by
the team of architects working on the project and by senior management of the various organizations. These
last in particular, stressed the need to align the information management with the business.
Refer to the scenario above
As Lead Architect you have been asked to update the IT architectural principles to address the concerns raised
by the project stakeholders and the senior management. According to TOGAF 9 (assuming the enterprise is
using the example set of principles in TOGAF 9 Section 23.6), which of the following is the best answer?
Choose one of the following answers
Scenario: Sollace Manufacturing
Please read this scenario prior to answering the question Sollace Manufacturing is a major supplier in the automotive industry, headquartered In Cleveland, Ohio with manufacturing plants in Chicago, Sao Paulo, Stuttgart, Yokohama, and Seoul. Each of these plants has been operating its own planning and production scheduling systems, as well as custom developed applications that drive the automated production equipment at each plant.
Sollace Manufacturing is implementing lean manufacturing principles to minimize waste and improve the efficiency of all of its production operations. During a recent exercise held for internal quality improvement, it was determined that a significant reduction in process waste could be achieved by replacing the current planning and scheduling systems with a common Enterprise Resource Planning (ERP) system located in the Cleveland data center. This central system would provide support to each of the plants replacing the functionality in the existing systems. It would also eliminate the need for full data centers at each of the plant facilities. A reduced number of IT staff could support the remaining applications. In some cases, a third-party contractor could provide those staff. The Sollace Manufacturing Enterprise Architecture department has been operating for several years and has mature, well-developed architecture governance and development processes that are strongly based on TOGAF 9. At a recent meeting, the Architecture Review Board approved a Request for Architecture Work from the Chief Engineer of Global Manufacturing Operations who is the project sponsor. The request covered the initial architectural investigations and the development of a comprehensive architecture to plan the transformation. The Common ERP Deployment architecture project team has now been formed, and the project team has been asked to develop an Architecture Vision that will achieve the desired outcomes and benefits. Some of the plant managers have expressed concern about the security and reliability of driving their planning and production scheduling from a central system located in Cleveland. The Chief Engineer wants to know how these concerns can be addressed.
Refer to the Sollace Manufacturing Scenario You are serving as the Lead Enterprise Architect for the Common ERP Deployment architecture project. One of the earliest initiatives in the Enterprise Architecture program at Sollace Manufacturing was the definition of a set of IT principles and architecture principles that are well aligned with the overall enterprise principles. These now need to be updated to address the concerns raised.
You have been asked to select a set of principles most appropriate for guiding the team to define a robust solution. [Note: You should assume that Sollace Manufacturing has adopted the example set of principles that are listed and defined in TOGAF 9, Section 23.6.] Based on TOGAF 9, which of the following is the best answer?
Scenario: Zephyr Enterprises
Please read this scenario prior to answering the question
Zephyr Enterprises specializes in the development of wind turbine blades for use in large-scale commercial wind energy production systems. Zephyr has manufacturing facilities located in Palm Springs, California, Omaha, Nebraska, and Winnipeg, Ontario. Each of these plants supplies a different manufacturer that builds and sells complete systems. The turbine blades are custom engineered to meet each manufacturers design specifications.
Until recently, most turbine blades were fabricated manually using molded fiber-reinforced plastics. However, recent improvements in composite materials, coupled with enhanced automated methods for precision application of materials during the molding process, have led to significant reduction in weight, increase in strength, and greatly improved blade longevity. Zephyr has pioneered the development of a proprietary automated process for continuous extrusion of the turbine blades. Patents have been filed to protect the process, but certain trade secrets must be closely guarded.
Zephyr has a mature Enterprise Architecture organization that is supported by a cross-functional Architecture Review Board. The Chief Information Officer and the Chief Operating Officer co-sponsor the Enterprise Architecture program.
Zephyr has used TOGAF and its Architecture Development Method (ADM) to develop its automated manufacturing processes and systems that are used to design, manufacture, and test the blade assemblies. They have recently updated to TOGAF 9 and have adapted the Zephyr Enterprise Architecture to closely follow the TOGAF 9 framework. All of Zephyrs IT architects have been trained and certified on TOGAF 9.Recently, an architecture project was completed that defined a standard approach for controlling the Automated Test System that is used at each plant to perform final quality assurance tests on each completed blade assembly.
The Manufacturing Architecture Board approved the plan for immediate implementation at each plant.
An Architecture Contract was developed that detailed the work needed to implement and deploy the new Automated Test System controller. The Chief Engineer, sponsor of the activity, has expressed concern that a uniform process be employed at each site to ensure consistency.
Refer to the Zephyr Enterprises Scenario
You have been assigned by the Lead Architect for the Automated Test System controller project to conduct Compliance Assessments at each manufacturing plant.
During the course of the assessment at the Omaha plant, you discover that the Distributed Data Acquisition System they have purchased uses a proprietary Remote Procedure Call (RPC) that utilizes kernel mode threads instead of the user mode threads that are specified in the Architecture Definition Document. In all other respects, the system meets the requirements stated in the Architecture Definition Document and seems to perform correctly.
You have been asked to describe the compliance of this system for the final report.
Based on TOGAF 9, which of the following is the best answer?
Please read this scenario prior to answering the question
Your role is that of the Lead Enterprise Architect at a multinational automotive corporation. The company is
headquartered in Germany, and manufactures cars, trucks and buses. It has manufacturing plants across
North America, South America, Europe and Asia. Each of these plants has been operating its own planning
and production scheduling systems, as well as custom developed applications that drive the automated
production equipment at each plant.
The company has an ongoing initiative to improve the efficiency of all of its production operations, and in
particular to reduce its carbon footprint. During a recent exercise held for internal quality improvement, it was
determined that a significant reduction in energy usage could be achieved by replacing the current planning
and scheduling systems with a common Enterprise Resource Planning (ERP) system located in one central
data center. This central system would provide support to each of the plants replacing the functionality in the
existing systems. It would also eliminate the need for full data centers at each of the plant facilities.
The Enterprise Architecture department has been operating for several years and has mature, well-developed
architecture governance and development processes that are based on the TOGAF standard. At a recent
meeting, the Architecture Board approved a Request for Architecture Work sponsored by the global CIO. The
request covered the initial architectural investigations and the development of a comprehensive architecture to
plan the transformation.
Refer to the Scenario
You have been asked to select the most appropriate recommendation to ensure that the team evaluated
different approaches to the problem and clarifies the requirements for the architecture.
Based on the TOGAF standard, which of the following is the best answer?
Enter your email address to download TheOpenGroup.OG0-092.v2022-09-02.q69 Dumps
