Free USGBC LEED-AP-Homes Exam Dumps Questions & Answers

The primary purpose of the Thermal Enclosure Checklist is to:

• A.  Perform preliminary air infiltration testing prior to HERS rater inspection
• B.  Inspect continuity of air barriers and quality of insulation installation
• C.  Inspect continuity of ductwork and quality of duct insulation
• D.  Evaluate site appropriateness for ground-source heat pump installation

The minimum required outdoor air ventilation is calculated based on the conditioned floor area of the home and the:

• A.  Number of bathrooms
• B.  Number of full-time occupants
• C.  Number of bedrooms
• D.  Volume of the home

A project has a 2,500 ft² (232 m²) roof, 200 ft² (18.58 m²) uncovered patio, 100 ft² (9 m²) walkway, and 800 ft² (74 m²) driveway. The designer has selected ENERGY STAR qualified roofing material for 100% of the roof and open grid pavers (with 30% grass) for the patio and walkway. The driveway is gray concrete with an SR of 0.20. What is the percentage of non-absorptive hardscape material, rounded to the nearest whole number (if necessary)?

• A.  94%
• B.  72%
• C.  75%
• D.  98%

A single-family home meets the Indoor Environmental Quality Credit Prerequisite, Ventilation using a continuous exhaust strategy. Which of the following Indoor Environmental Quality credits are potential credit synergies?

• A.  Enhanced Ventilation
• B.  Radon Control
• C.  Enhanced Combustion Venting
• D.  Contaminant Control

Introduction of outdoor air works to improve indoor air quality by:

• A.  Source removal
• B.  Source control
• C.  Dilution
• D.  Pressurization