Refer to the exhibit.

In a bidirectional PIM network using Phantom RP as an RP redundancy mechanism, two Cisco NX-OS routers have these requirements:
* R1 must be the active RP.
* R2 must be the backup RP that is used only if R1 is not reachable
Drag and drop the configuration steps to complete the configuration for Router 2. Not all configuration steps are used.

Correct Answer:

Comment: *

Name: *

Email: *

Verification: *

What is a characteristic of electronic programmable logic device (EPLD) software upgrades?

• A.EPLD software should be upgraded only when instructed by Cisco TAC
• B.ELPD module upgrades are nondisruptive
• C.ELPD upgrades are available for fabric and power supply modules.
• D.EPLD software must be upgraded when Cisco MDS NX-OS is upgraded.

Comment: *

Name: *

Email: *

Verification: *

Due to a domain name change at a customer site, a Cisco UCS cluster must be renamed. An engineer must recommend a solution to ensure that the Cisco UCS Manager is available over HTTPS. Which action accomplishes this goal?

• A.Reinstall the cluster to generate the default key ring certificate
• B.Generate a new default key ring certificate from the Cisco UCS Manager
• C.Reboot the SSO component of the Cisco UCS Manager
• D.Regenerate the default key ring certificate manually

Correct Answer: D

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Management/3-1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1_chapter_0110.html

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.

What is the result of this series of commands?

• A.It reboots the server immediately.
• B.It verifies the firmware update on the server.
• C.It activates the firmware on the next adapter boot.
• D.It updates the firmware on adapter 1/1/1 immediately.

Correct Answer: C

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User-Guides/Firmware-Mgmt/4-0/b_UCSM_CLI_Firmware_Management_Guide_4-0/b_UCSM_CLI_Firmware_Management_Guide_4-0_chapter_011.html

Comment: *

Name: *

Email: *

Verification: *

Refer to the exhibit.

What is the result of implementing the configuration?

• A.Users specify the RADIUS server when they log in.
• B.RADIUS traffic is sourced from the VLAN 200 interface.
• C.The RADIUS server timeout value is 15 milliseconds.
• D.Only the RADIUS server is used for authentication.

Comment: *

Name: *

Email: *

Verification: *