Which of the following is not part of the recommended first response steps for network defenders?
Correct Answer: D
Question 12
Which of the following protocols is used for routing of voice conversation over the Internet?
Correct Answer: C
Question 13
Which of the following devices allows wireless communication devices to connect to a wireless network using Wi-Fi, Bluetooth, or related standards?
Correct Answer: B
A wireless access point (WAP) is a device that allows wireless communication devices to connect to a wireless network using Wi-Fi, Bluetooth, or related standards. The WAP usually connects to a wired network, and it can transmit data between wireless devices and wired devices on the network. Each access point can serve multiple users within a defined network area. As people move beyond the range of one access point, they are automatically handed over to the next one. A small WLAN requires a single access point. The number of access points in a network depends on the number of network users and the physical size of the network. Answer option C is incorrect. A wireless network interface card (WNIC) is a network card that connects to a radio-based computer network, unlike a regular network interface controller (NIC) that connects to a wire- based network such as token ring or ethernet. A WNIC, just like a NIC, works on the Layer 1 and Layer 2 of the OSI Model. A WNIC is an essential component for wireless desktop computer. This card uses an antenna to communicate through microwaves. A WNIC in a desktop computer is usually connected using the PCI bus. Answer option A is incorrect. ExpressCard, a new standard introduced by PCMCIA, is a thinner, faster, and lighter modular expansion for desktops and laptops. Users can add memory, wired or wireless communication cards, and security devices by inserting these modules into their computers. ExpressCard slots are designed to accommodate modules that use either Universal Serial Bus (USB) 2.0 or the PCI Express standard. ExpressCard modules are available in two sizes, i.e., 34 mm wide (ExpressCard/34) and 54 mm wide (ExpressCard/54). Both modules are 75 mm long and 5 mm high. An ExpressCard/34 module can be inserted in either a 54 mm slot or a 34 mm slot, but an ExpressCard/54 requires a Universal (54 mm) slot. However, an extender can be used with ExpressCard/34 slot to connect the ExpressCard/54 module from outside of the computer. Both the modules are identical in performance. They take full advantage of the features of the PCI Express or USB 2.0 interfaces. The only difference between them is that the ExpressCard/54 form-factor, due to its larger surface area, allows for greater thermal dissipation than does an ExpressCard/34. As the performance does not vary with module size, module developers usually prefer to fit their applications into the smaller ExpressCard/34 form factor. But some applications, such as SmartCard readers, and CompactFlash readers, require the extra width of an ExpressCard/54 module. Answer option D is incorrect. A wireless repeater is a networking device that works as a repeater between a wireless router and computers. It is used to connect a client to the network when the client is out of the service area of the access point. If the wireless repeater is configured properly, it extends the range of the wireless LAN network.
Question 14
Which of the following is designed to detect the unwanted presence of fire by monitoring environmental changes associated with combustion?
Correct Answer: C
An automatic fire alarm system is designed for detecting the unwanted presence of fire by monitoring environmental changes associated with combustion. In general, a fire alarm system is classified as either automatically actuated, manually actuated, or both. Automatic fire alarm systems are intended to notify the building occupants to evacuate in the event of a fire or other emergency, to report the event to an off-premises location in order to summon emergency services, and to prepare the structure and associated systems to control the spread of fire and smoke. Answer option B is incorrect. A fire suppression system is used in conjunction with smoke detectors and fire alarm systems to improve and increase public safety. Answer option D is incorrect. Gaseous fire suppression is a term to describe the use of inert gases and chemical agents to extinguish a fire. Answer option A is incorrect. A fire sprinkler is the part of a fire sprinkler system that discharges water when the effects of a fire have been detected, such as when a predetermined temperature has been reached.
Question 15
Which of the following protocols is used for inter-domain multicast routing and natively supports "source- specific multicast" (SSM)?
Correct Answer: A
BGMP stands for border gateway multicast protocol. It is used for inter-domain multicast routing and natively supports "source-specific multicast" (SSM). In order to support "any-source multicast" (ASM), BGMP builds shared trees for active multicast groups. This allows domains to build source-specific, inter-domain, distribution branches where needed. BGMP uses TCP as its transport protocol, which helps in eliminating the need to implement message fragmentation, retransmission, acknowledgement, and sequencing. Answer option B is incorrect. The Distance Vector Multicast Routing Protocol (DVMRP) is used to share information between routers to transport IP Multicast packets among networks. It uses a reverse path-flooding technique and is used as the basis for the Internet's multicast backbone (MBONE). In particular, DVMRP is notorious for poor network scaling, resulting from reflooding, particularly with versions that do not implement pruning. DVMRP's flat unicast routing mechanism also affects its capability to scale. Answer option D is incorrect. EIGRP is a Cisco proprietary protocol. It is an enhanced version of IGRP. It has faster convergence due to use of triggered update and saving neighbor's routing table locally. It supports VLSM and routing summarization. As EIGRP is a distance vector protocol, it automatically summarizes routes across Class A, B, and C networks. It also supports multicast and incremental updates and provides routing for three routed protocols, i.e., IP, IPX, and AppleTalk. Answer option C is incorrect. Open Shortest Path First (OSPF) is a routing protocol that is used in large networks. Internet Engineering Task Force (IETF) designates OSPF as one of the Interior Gateway Protocols. A host uses OSPF to obtain a change in the routing table and to immediately multicast updated information to all the other hosts in the network.
