An LTM device is running BIG-IP v10.2.0 software. The LTM Specialist is tasked with upgrading the LTM device to BIG-IP v11.2.0 HF1. The LTM Specialist starts the upgrade process by selecting the uploaded Hotfix and installing to an unused volume. After 10 minutes, the LTM Specialist checks the status of the upgrade process and notices that the process is stalled at 0%.
What should the LTM Specialist verify?

• A.the base software version exists on the LTM device
• B.the LTM device has an available Internet connection via the management interface
• C.the LTM device has been restarted into maintenance mode
• D.the selected volume has sufficient space available

Comment: *

Name: *

Email: *

Verification: *

A device on the network is configured with the same IP address as the management address of the active LTM device, causing the management GUI to be inaccessible.
Which two methods should the LTM Specialist use to access the LTM device in order to change the management IP address? (Choose two.)

• A.Connect via ssh to the AOM IP address.
• B.Connect a monitor and keyboard to the LTM device.
• C.Connect via ssh to the management address.
• D.Connect to the LTM device via serial connection.
• E.Connect via ssh to the standby unit and connect via ssh across the serial link between the devices.

Comment: *

Name: *

Email: *

Verification: *

-- Exhibit -

-- Exhibit --
Refer to the exhibit.
An LTM Specialist is reviewing the virtual server configuration on an LTM device.
Which two actions should the LTM Specialist perform to minimize the virtual server configuration? (Choose two.)

• A.Remove the 'default_class' from the virtual server.
• B.Remove the 'http' profile from the virtual server.
• C.Remove 'snat automap' from the virtual server.
• D.Combine 'acct_class' and 'marketing_class' into one class and update associations on the virtual server.
• E.Combine 'marketing_class' and 'default_class' into one class and update associations on the virtual server.

Comment: *

Name: *

Email: *

Verification: *

In preparation for a maintenance task, an LTM Specialist performs a "Force to Standby" on LTM device Unit 1. LTM device Unit 2 becomes active as expected. The maintenance task requires the reboot of Unit
1. Shortly after the reboot is complete, the LTM Specialist discovers that Unit 1 has become active and Unit 2 has returned to standby.
What would cause this behavior?

• A.Unit 1 is set with the redundancy state preference of active in devices groups.
• B.Unit 1 is set with the redundancy state preference of active in high availability.
• C.A traffic group is configured with Auto Failback, and Unit 1 is the default device.
• D.A device group is configured with Auto Failback, and Unit 1 is the default device.

Comment: *

Name: *

Email: *

Verification: *

Given LTM device ltm log:
Sep 26 20:51:08 local/lb-d-1 notice promptstatusd[3695]: 01460006:5: semaphore mcpd.running(1) held Sep 26 20:51:08 local/lb-d-1 notice promptstatusd[3695]: 01460006:5:
Sep 26 20:51:08 local/lb-d-1 warning promptstatusd[3695]: 01460005:4: mcpd.running(1) held, wait for mcpd
Sep 26 20:51:08 local/lb-d-1 info sod[3925]: 010c0009:6: Lost connection to mcpd - reestablishing.
Sep 26 20:51:08 local/lb-d-1 err bcm56xxd[3847]: 012c0004:3: Lost connection with MCP: 16908291 ...
Exiting bsx_connect.cpp(174)
Sep 26 20:51:08 local/lb-d-1 info bcm56xxd[3847]: 012c0012:6: MCP Exit Status Sep 26 20:51:08 local/lb-d-1 info bcm56xxd[3847]: 012c0012:6: Info: LACP stats (time now:1348717868) :
no traffic
Sep 26 20:51:08 local/lb-d-1 info bcm56xxd[3847]: 012c0014:6: Exiting...
Sep 26 20:51:08 local/lb-d-1 err lind[3842]: 013c0004:3: IO error on recv from mcpd - connection lost Sep 26 20:51:08 local/lb-d-1 notice bigd[3837]: 01060110:5: Lost connection to mcpd with error 16908291, will reinit connection.
Sep 26 20:51:08 local/lb-d-1 err statsd[3857]: 011b0004:3: Initial subscription for system configuration failed with error ''
Sep 26 20:51:08 local/lb-d-1 err statsd[3857]: 011b0001:3: Connection to mcpd failed with error
'011b0004:3: Initial subscription for system configuration failed with error ''' Sep 26 20:51:08 local/lb-d-1 err csyncd[3851]: 013b0004:3: IO error on recv from mcpd - connection lost
.............skipping more logs.....
Sep 26 20:51:30 local/lb-d-1 notice sod[3925]: 01140030:5: HA proc_running bcm56xxd is now responding.
Sep 26 20:51:34 local/lb-d-1 notice sod[3925]: 01140030:5: HA proc_running mcpd is now responding.
Sep 26 20:51:34 local/lb-d-1 notice sod[3925]: 010c0018:5: Standby
Which daemon failed?

• A.promptstatusd
• B.bcm56xxd
• C.sod
• D.lind
• E.mcpd

Comment: *

Name: *

Email: *

Verification: *