The customer's network connection looks like:
HostA----GE0/0--MSR-1--S1/0-----WAN----S1/0--MSR-2--GE0/0----HostB
The two MSR routers are interconnected through the WAN, and the physical connection is now normal. The address of interface S1/0 of MSR-1 is 3.3.3.1/30, and the address of interface S1/0 of MSR-2 is 3.3.3.2/30. Now the following 4 static routes are configured on MSR-1:
ip route-static 192.168.1.0 255.255.255.0 3.3.3.2
ip route-static 192.168.2.0 255.255.255.0 3.3.3.2
ip route-static 192.168.3.0 255.255.255.0 3.3.3.2
ip route-static 192.168.4.0 255.255.255.0 3.3.3.2
The 192.168.0.0/22 ​​subnet is the LAN user network segment of MSR-2.
So which of the following descriptions are wrong? (multiple choice)

• A.These four routes will be written into the routing table of MSR-1
• B.Only the fourth route will be written into the routing table of MSR-1
• C.These four routes can be replaced by one route ip route-static 192.168.1.0 255.255.252.0 3.3.3.2
• D.Only the first route will be written into the routing table of MSR-1

Comment: *

Name: *

Email: *

Verification: *

The customer's network connection looks like:
HostA----GE0/0--MSR-1--S1/0-----WAN-----S1/0--MSR-2--GE0/0----HostB
It is known that the IP address of GE0/0 of MSR-2 is 2.2.2.1/24. The network is currently operating normally, and the hosts HostA and HostB on both sides can communicate with each other. Now the following routing is configured on MSR-2:
ip route-static 2.2.2.1 24 NULL 0
So ______ . (Multiple choice)

• A.You can still ping 2.2.2.1 on MSR-1
• B.HostA cannot ping 2.2.2.1
• C.Can't ping through MSR-1 2.2.2.1
• D.HostA can still ping 2.2.2.1

Comment: *

Name: *

Email: *

Verification: *

If you want to set the frame relay LMI type to ANSI, you should ______.

• A.Use the command fr lmi class ansi in interface mode
• B.Use the command fr lmi class ansi in system mode
• C.Use the command fr lmi type ansi in interface mode
• D.Use the command fr lmi type ansi in system mode

Comment: *

Name: *

Email: *

Verification: *

The IP address 10.0.10.65 and the mask 255.255.255.224 represent a ______.

• A.host address
• B.None of the above
• C.Network address
• D.Broadcast address

Comment: *

Name: *

Email: *

Verification: *

Divide a class C network segment into subnets. If the subnet mask is 28 bits, then the maximum number of hosts that can be accommodated in each subnet is ____. (Please fill in Arabic numerals)

Comment: *

Name: *

Email: *

Verification: *